Analogix 7625 can be used in systems to switch the DP traffic between two downstreams, which can be USB Type-C DisplayPort alternate mode lane or regular DisplayPort output ports. Update the binding to accommodate this usage by introducing a data-lanes and a mode-switch property on endpoints. Also include the link to the product brief in the bindings. Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- Changes in v11: - Updated the description of the endpoints - Referenced video-interfaces.yaml instead for the endpoints Changes in v10: - Collected Reviewed-by and Tested-by tags Changes in v9: - Collected Reviewed-by tag Changes in v8: - Updated anx7625 bindings for data-lane property - Fixed the subject prefix Changes in v7: - Fixed issues reported by dt_binding_check - Updated the schema and the example dts for data-lanes. - Changed to generic naming for the example dts node. Changes in v6: - Remove switches node and use endpoints and data-lanes property to describe the connections. .../display/bridge/analogix,anx7625.yaml | 94 ++++++++++++++++++- 1 file changed, 91 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 4590186c4a0b..f287e8e0602f 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -12,7 +12,8 @@ maintainers: description: | The ANX7625 is an ultra-low power 4K Mobile HD Transmitter - designed for portable devices. + designed for portable devices. Product brief is available at + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf properties: compatible: @@ -112,9 +113,46 @@ properties: data-lanes: true port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: - Video port for panel or connector. + Video port for panel or connector. Each endpoint connects to a video + output downstream, and the "data-lanes" property is used to describe + the pin connections. 0, 1, 2, 3 in "data-lanes" maps to SSRX1, SSTX1, + SSRX2, SSTX2, respectively. + + patternProperties: + "^endpoint@[01]$": + $ref: /schemas/media/video-interfaces.yaml# + properties: + reg: true + + remote-endpoint: true + + data-lanes: + oneOf: + - items: + - enum: [0, 1, 2, 3] + + - items: + - const: 0 + - const: 1 + + - items: + - const: 2 + - const: 3 + + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + mode-switch: + type: boolean + description: Register this node as a Type-C mode switch or not. + + required: + - remote-endpoint required: - port@0 @@ -186,3 +224,53 @@ examples: }; }; }; + - | + i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_dp_pins>; + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1100_dpbrdg>; + vdd18-supply = <&pp1800_dpbrdg_dx>; + vdd33-supply = <&pp3300_dpbrdg_dx>; + analogix,audio-enable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7625_dp_in: endpoint { + bus-type = <7>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + anx_typec0: endpoint@0 { + reg = <0>; + mode-switch; + data-lanes = <0 1>; + remote-endpoint = <&typec_port0>; + }; + anx_typec1: endpoint@1 { + reg = <1>; + mode-switch; + data-lanes = <2 3>; + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + }; -- 2.39.1.519.gcb327c4b5f-goog
