Add sdio/emmc driver support for StarFive JH7110 soc.
Tested-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
---
MAINTAINERS | 6 +
drivers/mmc/host/Kconfig | 10 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/dw_mmc-starfive.c | 185 +++++++++++++++++++++++++++++
4 files changed, 202 insertions(+)
create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 85e8f83161d7..0ff348da6463 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19659,6 +19659,12 @@ F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
F: drivers/reset/starfive/reset-starfive-jh71*
F: include/dt-bindings/reset/starfive?jh71*.h
+STARFIVE JH7110 MMC/SD/SDIO DRIVER
+M: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
+S: Maintained
+F: Documentation/devicetree/bindings/mmc/starfive*
+F: drivers/mmc/dw_mmc-starfive.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
M: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index fb1062a6394c..b87262503403 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -871,6 +871,16 @@ config MMC_DW_ROCKCHIP
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on RK3066, RK3188 and RK3288 SoC's.
+config MMC_DW_STARFIVE
+ tristate "StarFive specific extensions for Synopsys DW Memory Card Interface"
+ depends on SOC_STARFIVE
+ depends on MMC_DW
+ select MMC_DW_PLTFM
+ help
+ This selects support for StarFive JH7110 SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on StarFive JH7110 SoC.
+
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 4e4ceb32c4b4..32c0e5564b9a 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o
obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o
+obj-$(CONFIG_MMC_DW_STARFIVE) += dw_mmc-starfive.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
obj-$(CONFIG_MMC_VUB300) += vub300.o
diff --git a/drivers/mmc/host/dw_mmc-starfive.c b/drivers/mmc/host/dw_mmc-starfive.c
new file mode 100644
index 000000000000..e4d0bdb40d12
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-starfive.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive Designware Mobile Storage Host Controller Driver
+ *
+ * Copyright (c) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define ALL_INT_CLR 0x1ffff
+#define MAX_DELAY_CHAIN 32
+
+struct starfive_priv {
+ struct device *dev;
+ struct regmap *reg_syscon;
+ u32 syscon_offset;
+ u32 syscon_shift;
+ u32 syscon_mask;
+};
+
+static void dw_mci_starfive_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+ int ret;
+ unsigned int clock;
+
+ if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing == MMC_TIMING_UHS_DDR50) {
+ clock = (ios->clock > 50000000 && ios->clock <= 52000000) ? 100000000 : ios->clock;
+ ret = clk_set_rate(host->ciu_clk, clock);
+ if (ret)
+ dev_dbg(host->dev, "Use an external frequency divider %uHz\n", ios->clock);
+ host->bus_hz = clk_get_rate(host->ciu_clk);
+ } else {
+ dev_dbg(host->dev, "Using the internal divider\n");
+ }
+}
+
+static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
+ u32 opcode)
+{
+ static const int grade = MAX_DELAY_CHAIN;
+ struct dw_mci *host = slot->host;
+ struct starfive_priv *priv = host->priv;
+ int rise_point = -1, fall_point = -1;
+ int err, prev_err;
+ int i;
+ bool found = 0;
+ u32 regval;
+
+ /* Use grade as the max delay chain, and use the rise_point and
+ * fall_point to ensure the best sampling point of a data input
+ * signals.
+ */
+ for (i = 0; i < grade; i++) {
+ regval = i << priv->syscon_shift;
+ err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
+ priv->syscon_mask, regval);
+ if (err)
+ return err;
+ mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+ err = mmc_send_tuning(slot->mmc, opcode, NULL);
+ if (!err)
+ found = 1;
+
+ if (i > 0) {
+ if (err && !prev_err)
+ fall_point = i - 1;
+ if (!err && prev_err)
+ rise_point = i;
+ }
+
+ if (rise_point != -1 && fall_point != -1)
+ goto tuning_out;
+
+ prev_err = err;
+ err = 0;
+ }
+
+tuning_out:
+ if (found) {
+ if (rise_point == -1)
+ rise_point = 0;
+ if (fall_point == -1)
+ fall_point = grade - 1;
+ if (fall_point < rise_point) {
+ if ((rise_point + fall_point) >
+ (grade - 1))
+ i = fall_point / 2;
+ else
+ i = (rise_point + grade - 1) / 2;
+ } else {
+ i = (rise_point + fall_point) / 2;
+ }
+
+ regval = i << priv->syscon_shift;
+ err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
+ priv->syscon_mask, regval);
+ if (err)
+ return err;
+ mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+ dev_info(host->dev, "Found valid delay chain! use it [delay=%d]\n", i);
+ } else {
+ dev_err(host->dev, "No valid delay chain! use default\n");
+ err = -EINVAL;
+ }
+
+ mci_writel(host, RINTSTS, ALL_INT_CLR);
+ return err;
+}
+
+static int dw_mci_starfive_parse_dt(struct dw_mci *host)
+{
+ struct of_phandle_args args;
+ struct starfive_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = of_parse_phandle_with_fixed_args(host->dev->of_node,
+ "starfive,syscon", 3, 0, &args);
+ if (ret) {
+ dev_err(host->dev, "Failed to parse starfive,syscon\n");
+ return -EINVAL;
+ }
+
+ priv->reg_syscon = syscon_node_to_regmap(args.np);
+ of_node_put(args.np);
+ if (IS_ERR(priv->reg_syscon))
+ return PTR_ERR(priv->reg_syscon);
+
+ priv->syscon_offset = args.args[0];
+ priv->syscon_shift = args.args[1];
+ priv->syscon_mask = args.args[2];
+
+ host->priv = priv;
+
+ return 0;
+}
+
+static const struct dw_mci_drv_data starfive_data = {
+ .common_caps = MMC_CAP_CMD23,
+ .set_ios = dw_mci_starfive_set_ios,
+ .parse_dt = dw_mci_starfive_parse_dt,
+ .execute_tuning = dw_mci_starfive_execute_tuning,
+};
+
+static const struct of_device_id dw_mci_starfive_match[] = {
+ { .compatible = "starfive,jh7110-mmc",
+ .data = &starfive_data },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_starfive_match);
+
+static int dw_mci_starfive_probe(struct platform_device *pdev)
+{
+ return dw_mci_pltfm_register(pdev, &starfive_data);;
+}
+
+static struct platform_driver dw_mci_starfive_driver = {
+ .probe = dw_mci_starfive_probe,
+ .remove = dw_mci_pltfm_remove,
+ .driver = {
+ .name = "dwmmc_starfive",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = dw_mci_starfive_match,
+ },
+};
+module_platform_driver(dw_mci_starfive_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver Extension");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dwmmc_starfive");
--
2.34.1
