Create tas2781.yaml for tas2781 driver. Signed-off-by: Shenghao Ding <13916275206@xxxxxxx> --- Changes in v5: - Drop the full stop in the Subject. - Drop the reset-gpios reference to gpio.txt. - Add Changelog. Changes to be committed: new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml --- .../devicetree/bindings/sound/ti,tas2781.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..8af44792a904 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding@xxxxxx> + - Kevin Lu <kevin-lu@xxxxxx> + +description: | + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated an on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + maxItems: 1 + description: | + I2C address of the device can be in range from 0x38 to 0x40. + + reset-gpios: + maxItems: 1 + description: | + A GPIO line handling reset of the chip. As the line is active high, + it should be marked GPIO_ACTIVE_HIGH. + + interrupts: + maxItems: 1 + + ti,audio-slots: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: | + I2c address of the device for different audio slots, + useless in mono case. + + ti,broadcast-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Generic i2c address for all the tas2781 devices in + purpose of I2C broadcast during the multi-device + writes, useless in mono case. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad support, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>; + #sound-dai-cells = <1>; + reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >; + interrupt-parent = <&gpio1>; + interrupts = <15>; + ti,audio-slots = < 0x38 /* topleft-channel */ + 0x39 /* topright-channel */ + 0x3a /* bottomleft-channel */ + 0x3b /* bottomright-channel */ + >; + ti,broadcast-addr = <0x40>; + }; + }; +... -- 2.34.1
