On Fri, Sep 30, 2022 at 09:00:41AM -0700, Dmitry Torokhov wrote:
> According to c8sectpfe driver code we first drive reset line low and
> then high to reset the port, therefore the reset line is supposed to
> be annotated as "active low". This will be important when we convert
> the driver to gpiod API.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
Gentle ping on this one...
>
> v2: fixed typo in the subject, added Patrice's reviewed-by
>
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 2aa94605d3d4..d52a7aaa1074 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -178,7 +178,7 @@ tsin0: port {
> tsin-num = <0>;
> serial-not-parallel;
> i2c-bus = <&ssc2>;
> - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
> dvb-card = <STV0367_TDA18212_NIMA_1>;
> };
> };
> --
> 2.38.0.rc1.362.ged0d419d3c-goog
>
>
> --
> Dmitry
--
Dmitry
