Add compatible for both PCIe found on SM8550. Also add the cnoc_pcie_sf_axi clock needed by the SM8550. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx> --- The v5 of this patchset is: https://lore.kernel.org/all/20230124124714.3087948-11-abel.vesa@xxxxxxxxxx/ Changes since v5: * none Changes since v4: * added Mani's R-b tag Changes since v3: * renamed cnoc_pcie_sf_axi to cnoc_sf_axi Changes since v2: * none Changes since v1: * changed the subject line prefix for the patch to match the history, like Bjorn Helgaas suggested. * added Konrad's R-b tag drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a232b04af048..6a70c9c6f98d 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -182,10 +182,10 @@ struct qcom_pcie_resources_2_3_3 { /* 6 clocks typically, 7 for sm8250 */ struct qcom_pcie_resources_2_7_0 { - struct clk_bulk_data clks[12]; + struct clk_bulk_data clks[14]; int num_clks; struct regulator_bulk_data supplies[2]; - struct reset_control *pci_reset; + struct reset_control *rst; }; struct qcom_pcie_resources_2_9_0 { @@ -1177,9 +1177,9 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) unsigned int idx; int ret; - res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); - if (IS_ERR(res->pci_reset)) - return PTR_ERR(res->pci_reset); + res->rst = devm_reset_control_array_get_exclusive(dev); + if (IS_ERR(res->rst)) + return PTR_ERR(res->rst); res->supplies[0].supply = "vdda"; res->supplies[1].supply = "vddpe-3v3"; @@ -1205,9 +1205,11 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) res->clks[idx++].id = "ddrss_sf_tbu"; res->clks[idx++].id = "aggre0"; res->clks[idx++].id = "aggre1"; + res->clks[idx++].id = "noc_aggr"; res->clks[idx++].id = "noc_aggr_4"; res->clks[idx++].id = "noc_aggr_south_sf"; res->clks[idx++].id = "cnoc_qx"; + res->clks[idx++].id = "cnoc_sf_axi"; num_opt_clks = idx - num_clks; res->num_clks = idx; @@ -1237,17 +1239,17 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) if (ret < 0) goto err_disable_regulators; - ret = reset_control_assert(res->pci_reset); - if (ret < 0) { - dev_err(dev, "cannot assert pci reset\n"); + ret = reset_control_assert(res->rst); + if (ret) { + dev_err(dev, "reset assert failed (%d)\n", ret); goto err_disable_clocks; } usleep_range(1000, 1500); - ret = reset_control_deassert(res->pci_reset); - if (ret < 0) { - dev_err(dev, "cannot deassert pci reset\n"); + ret = reset_control_deassert(res->rst); + if (ret) { + dev_err(dev, "reset deassert failed (%d)\n", ret); goto err_disable_clocks; } @@ -1841,6 +1843,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-sm8350", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 }, + { .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 }, { } }; -- 2.34.1
