[PATCH v5 2/2] pstore/ram: Rework logic for detecting ramoops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reserved memory region for ramoops is assumed to be at a fixed
and known location when read from the devicetree. This is not desirable
in an environment where it is preferred the region to be dynamically
allocated at runtime, as opposed to being fixed at compile time.

Also, some of the platforms might be still expecting dedicated
memory region for ramoops node where the region is known beforehand
and platform_get_resource() is used in that case.

So, add logic to detect the start and size of the ramoops memory
region by looking up reserved memory region with of_reserved_mem_lookup()
api when platform_get_resource() fails also update the ramoops
documentation,

Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---
Changes in v5:
 - Removed the CC list from the commit text.

Changes in v4:
 - Updated the minor change in documentation.

Changes in v3:
 - Merged 2/3 and 3/3 into one.
   https://lore.kernel.org/lkml/1673611126-13803-2-git-send-email-quic_mojha@xxxxxxxxxxx/
   https://lore.kernel.org/lkml/1673611126-13803-3-git-send-email-quic_mojha@xxxxxxxxxxx/

Changes in v2:
 - Addressed the comments made by kees and Guilherme in v1.


 Documentation/admin-guide/ramoops.rst | 25 ++++++++++++++++++++++---
 fs/pstore/ram.c                       | 18 +++++++++++++-----
 2 files changed, 35 insertions(+), 8 deletions(-)

diff --git a/Documentation/admin-guide/ramoops.rst b/Documentation/admin-guide/ramoops.rst
index e9f8514..3586d15 100644
--- a/Documentation/admin-guide/ramoops.rst
+++ b/Documentation/admin-guide/ramoops.rst
@@ -16,8 +16,9 @@ survive after a restart.
 Ramoops concepts
 ----------------
 
-Ramoops uses a predefined memory area to store the dump. The start and size
-and type of the memory area are set using three variables:
+Ramoops uses both predefined and dynamically memory area to store the dump.
+The start and size and type of the memory area are set using three
+variables:
 
   * ``mem_address`` for the start
   * ``mem_size`` for the size. The memory size will be rounded down to a
@@ -70,7 +71,8 @@ Setting the ramoops parameters can be done in several different manners:
 
  B. Use Device Tree bindings, as described in
  ``Documentation/devicetree/bindings/reserved-memory/ramoops.yaml``.
- For example::
+
+ Example of statically reserved ramoops region::
 
 	reserved-memory {
 		#address-cells = <2>;
@@ -85,6 +87,23 @@ Setting the ramoops parameters can be done in several different manners:
 		};
 	};
 
+ Example of dynamically reserved ramoops region::
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops_region: ramoops {
+			compatible = "ramoops";
+			alloc-ranges = <0x00000000 0xffffffff>;
+			size = <0 0x100000>;
+			record-size = <0x4000>;
+			console-size = <0x4000>;
+		};
+	};
+
+
  C. Use a platform device and set the platform data. The parameters can then
  be set through that platform data. An example of doing that is:
 
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index ade66db..17c9f46 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -20,6 +20,7 @@
 #include <linux/compiler.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
 
 #include "internal.h"
 #include "ram_internal.h"
@@ -643,6 +644,7 @@ static int ramoops_parse_dt(struct platform_device *pdev,
 {
 	struct device_node *of_node = pdev->dev.of_node;
 	struct device_node *parent_node;
+	struct reserved_mem *rmem;
 	struct resource *res;
 	u32 value;
 	int ret;
@@ -651,13 +653,19 @@ static int ramoops_parse_dt(struct platform_device *pdev,
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
-		dev_err(&pdev->dev,
-			"failed to locate DT /reserved-memory resource\n");
-		return -EINVAL;
+		rmem = of_reserved_mem_lookup(of_node);
+		if (!rmem) {
+			dev_err(&pdev->dev,
+				"failed to locate DT /reserved-memory resource\n");
+			return -EINVAL;
+		}
+		pdata->mem_size = rmem->size;
+		pdata->mem_address = rmem->base;
+	} else {
+		pdata->mem_size = resource_size(res);
+		pdata->mem_address = res->start;
 	}
 
-	pdata->mem_size = resource_size(res);
-	pdata->mem_address = res->start;
 	/*
 	 * Setting "unbuffered" is deprecated and will be ignored if
 	 * "mem_type" is also specified.
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux