Re: [PATCH v5 3/6] media: platform: visconti: Add Toshiba Visconti Video Input Interface driver user interace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ishikawa-san,

On Thu, Feb 02, 2023 at 04:52:56AM +0000, yuji2.ishikawa@xxxxxxxxxxxxx wrote:
> On Friday, January 27, 2023 5:49 AM, Laurent Pinchart wrote:
> > On Wed, Jan 25, 2023 at 10:20:27AM +0000, yuji2.ishikawa@xxxxxxxxxxxxx wrote:
> > > On Wednesday, January 18, 2023 10:04 AM, Laurent Pinchart wrote:
> > > > On Tue, Jan 17, 2023 at 12:47:10PM +0100, Hans Verkuil wrote:
> > > > > On 11/01/2023 03:24, Yuji Ishikawa wrote:
> > > > > > Add support to Video Input Interface on Toshiba Visconti ARM SoCs.
> > > > > > The interface device includes CSI2 Receiver, frame grabber,
> > > > > > video DMAC and image signal processor.
> > > > > > This patch provides the user interface layer.
> > > > > >
> > > > > > A driver instance provides three /dev/videoX device files; one
> > > > > > for RGB image capture, another one for optional RGB capture with
> > > > > > different parameters and the last one for RAW capture.
> > > > > >
> > > > > > Through the device files, the driver provides streaming (DMA-BUF) interface.
> > > > > > A userland application should feed DMA-BUF instances for capture buffers.
> > > > > >
> > > > > > The driver is based on media controller framework.
> > > > > > Its operations are roughly mapped to two subdrivers; one for ISP
> > > > > > and
> > > > > > CSI2 receiver (yields 1 instance), the other for capture (yields
> > > > > > 3 instances for each capture mode).
> > > > > >
> > > > > > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@xxxxxxxxxxxxx>
> > > > > > ---
> > > > > > Changelog v2:
> > > > > > - Resend v1 because a patch exceeds size limit.
> > > > > >
> > > > > > Changelog v3:
> > > > > > - Adapted to media control framework
> > > > > > - Introduced ISP subdevice, capture device
> > > > > > - Remove private IOCTLs and add vendor specific V4L2 controls
> > > > > > - Change function name avoiding camelcase and uppercase letters
> > > > > >
> > > > > > Changelog v4:
> > > > > > - Split patches because the v3 patch exceeds size limit
> > > > > > - Stop using ID number to identify driver instance:
> > > > > >   - Use dynamically allocated structure to hold HW specific context,
> > > > > >     instead of static one.
> > > > > >   - Call HW layer functions with the context structure instead of ID number
> > > > > > - Use pm_runtime to trigger initialization of HW
> > > > > >   along with open/close of device files.
> > > > > >
> > > > > > Changelog v5:
> > > > > > - Fix coding style problems in viif.c
> > > > > > ---
> > > > > >  drivers/media/platform/visconti/Makefile      |    1 +
> > > > > >  drivers/media/platform/visconti/viif.c        |  545 ++++++++
> > > > > >  drivers/media/platform/visconti/viif.h        |  203 +++
> > > > > >  .../media/platform/visconti/viif_capture.c    | 1201 +++++++++++++++++
> > > > > >  drivers/media/platform/visconti/viif_isp.c    |  846 ++++++++++++
> > > > > >  5 files changed, 2796 insertions(+)  create mode 100644
> > > > > > drivers/media/platform/visconti/viif.c
> > > > > >  create mode 100644 drivers/media/platform/visconti/viif.h
> > > > > >  create mode 100644
> > > > > > drivers/media/platform/visconti/viif_capture.c
> > > > > >  create mode 100644 drivers/media/platform/visconti/viif_isp.c
> > > >
> > > > [snip]
> > > >
> > > > > > +static int viif_s_edid(struct file *file, void *fh, struct
> > > > > > +v4l2_edid *edid) {
> > > > > > +	struct viif_device *viif_dev = video_drvdata_to_capdev(file)->viif_dev;
> > > > > > +	struct viif_subdev *viif_sd = viif_dev->sd;
> > > > > > +
> > > > > > +	return v4l2_subdev_call(viif_sd->v4l2_sd, pad, set_edid,
> > > > > > +edid); }
> > > > >
> > > > > Has this driver been tested with an HDMI receiver? If not, then I
> > > > > would recommend dropping support for it until you actually can
> > > > > test with such hardware.
> > > > >
> > > > > The DV_TIMINGS API is for HDMI/DVI/DisplayPort etc. interfaces,
> > > > > it's not meant for CSI and similar interfaces.
> > > >
> > > > More than that, for MC-based drivers, the video node should *never*
> > > > forward ioctls to a connected subdev. The *only* valid calls to
> > > > v4l2_subdev_call() in this file are
> > > >
> > > > - to video.s_stream() in the start and stop streaming handler
> > > >
> > > > - to pad.g_fmt() when starting streaming to validate that the connected
> > > >   subdev outputs a format compatible with the format set on the video
> > > >   capture device
> > > >
> > > > That's it, nothing else, all other calls to v4l2_subdev_call() must
> > > > be dropped from the implementation of the video_device.
> > >
> > > Thank you for your comment. I understand the restriction.
> > > I'll remove following functions corresponding to ioctls.
> > >
> > > * viif_enum_input
> > > * viif_g_selection
> > > * viif_s_selection
> > > * viif_dv_timings_cap
> > > * viif_enum_dv_timings
> > > * viif_g_dv_timings
> > > * viif_s_dv_timings
> > > * viif_query_dv_timings
> > > * viif_g_edid
> > > * viif_s_edid
> > > * viif_g_parm
> > > * viif_s_parm
> > > * viif_enum_framesizes
> > 
> > This one should stay, it should report the minimum and maximum sizes
> > supported by the video nodes, regardless of the configuration of the connected
> > subdev.
> 
> I'll keep it.
> 
> > > * viif_enum_frameintervals
> > >
> > > I can call subdevices directly if I need. Is it a correct understanding?
> > 
> > what do you mean exactly by calling subdevices directly ?
> 
> I meant userland can configure subdevices with /dev/v4l-subdev.

Ah yes absolutely, userspace will configure the subdevs.

> > > As for viif_try_fmt_vid_cap and viif_s_fmt_vid_cap, I'll remove
> > > pad.g_fmt() call which is for checking pixel format.
> > > The check will be moved to viif_capture_link_validate() validation
> > > routine triggered by a start streaming event.
> > >
> > > > [snip]

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux