On 2022/11/22 02:28, Sebastian Reichel wrote:
Hi Qu,
On Mon, Nov 21, 2022 at 04:52:22PM +0800, Qu Wenruo wrote:
On 2022/10/18 23:13, Sebastian Reichel wrote:
This has been part of a bigger patchset adding basic rk3588 support.
Since that gets more and more out of hand, I'm now sending patches
for each subsystem as individual patchset.
Awesome work! Thanks for the work to bring upstream support for RK3588.
This upstream work is especially important since the vendor kernel has so
many weird things and is never properly tested using newer tool chains.
But considering the support has been split into different patchset, is there
a git repo that I can fetch all the patches and test it on my Rock5B board?
try linux-next + https://lore.kernel.org/all/20221121175814.68927-1-sebastian.reichel@xxxxxxxxxxxxx/
It should boot, but that's about it. For Rock 5B there is not even
ethernet support, since that needs PCIe. Ideally the DT series makes
it in time for the 6.2 merge window.
Alternatively my working branch (I rebase that!) is available here:
https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588
It adds PMIC, thermal and cpufrequency support.
Sorry for the late reply, finally got my extra rock5b to do experiments.
(The existing one is now a VM host for 24x7 fstests runs)
[TEST REPORT]
Yes, I got the expected-to-work parts working:
- ttyS2 (serial@feb50000)
Both earlycon and later initialized console.
- eMMC (mmc@fe2e0000)
The rootfs read write seems fine.
The latest code seems to have sdmmc, but ironically I don't have
any sdcard at hand right now...
[PCIE ENABLEMENT]
Personally speaking, I can not care less about things like GMAC (Rock5B
uses r8125), nor USB (PCIE rules them all) nor graphics (serial is good
neough).
Thus I'm trying to see if I can re-use the rk3568 pcie drivers.
It looks like unlike RK3399, this time we need PHY for PCIE, and it is
already done in rk3568 pcie controller, and the core AIX->PCIE is done
by the designware core, thus it looks feasible to reuse the driver?
But I can be totally wrong, since I'm really just a newbie in arm world.
Any hint on the PCIE bus bringup? Or what I can help for the PCIE bringup?
I know RK3588S seems to cut the PCIE3 lanes completely, and droped one
PCIE2.0 lane, but I don't know the address for the cut one...
[VENDOR KERNEL PCIE BUG]
Another thing I noticed with vendor (5.10.x) kernel is, the PCIE link up
is unreliable, causing random reset.
Maybe the incoming upstream bring up can fix it?
Thanks,
Qu
-- Sebastian
