Re: [PATCH v2 1/3] dmaengine: qcom_bam_dma: Generalize BAM register offset calculations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Sep 29, 2014 at 10:03:07AM +0530, Archit Taneja wrote:
> The BAM DMA IP comes in different versions. The register offset layout varies
> among these versions. The layouts depend on which generation/family of SoCs they
> belong to.
> 
> The current SoCs(like 8084, 8074) have a layout where the Top level registers
> come in the beginning of the address range, followed by pipe and event
> registers. The BAM revision numbers fall above 1.4.0.
> 
> The older SoCs (like 8064, 8960) have a layout where the pipe registers come
> first, and the top level come later. These have BAM revision numbers lesser than
> 1.4.0.
> 
> It isn't suitable to have macros provide the register offsets with the layouts
> changed. Future BAM revisions may have different register layouts too. The
> register addresses are now calculated by referring a table which contains a base
> offset and multipliers for pipe/evnt/ee registers.
> 
> We have a common function bam_addr() which computes addresses for all the
> registers. When computing address of top level/ee registers, we pass 0 to the
> pipe argument in addr() since they don't have any multiple instances.
> 
> Some of the unused register definitions are removed. We can add new registers as
> we need them.

Applied alll three, thanks

-- 
~Vinod

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux