From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> This iteration contains a fixed DTS and all not already applied DT bindings patches (with tags collected). v2 -> v3: - reorder properties (reg always first, etc.) - tweak node names - remove properties filled in by the firmware v1 -> v2: - lots of improvements all around the place to make the dts pass dtbs_check (with some additional patches fixing bugs in existing dt bindings), make dtbs W=1 and checkpatch.pl - move board-specific properties to the board .dts file - ordered top-level nodes alphabetically and sub-nodes by the reg property - fixed licensing - set #address-cells and #size-cells to <2> in the soc node and update sub-nodes Bartosz Golaszewski (5): dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible dt-bindings: arm: qcom: add the sa8775p-ride board arm64: dts: qcom: add initial support for qcom sa8775p-ride .../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/firmware/qcom,scm.yaml | 1 + .../bindings/mailbox/qcom-ipcc.yaml | 1 + .../bindings/watchdog/qcom-wdt.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 47 + arch/arm64/boot/dts/qcom/sa8775p.dtsi | 812 ++++++++++++++++++ 7 files changed, 870 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi -- 2.37.2
