From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Add DT bindings for the TLMM controller on sa8775p platforms. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 138 ++++++++++++++++++ 1 file changed, 138 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml new file mode 100644 index 000000000000..a91f5816ed5e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SA8775P TLMM block + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sa8775p-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 74 + + gpio-line-names: + maxItems: 148 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sa8775p-tlmm-state" + additionalProperties: false + +$defs: + qcom-sa8775p-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, + emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0, + emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, + emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, + gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, + jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3, + mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, + mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, + mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync, + mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, + mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1, + pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3, + qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0, + sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + + qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + }; +... -- 2.37.2
