[PATCH 2/7] dt-bindings: rtc: Add backup-switch-mode property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

Document the backups-switch-mode property that can be used to set the
BSM via devicetree on devices like the RV3028.

Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
index c6fff5486fe6..76b9605e755b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -26,6 +26,13 @@ properties:
       0: not chargeable
       1: chargeable
 
+  backup-switch-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    description:
+      The backup switch mode the RTC is forced into when registering
+      the device. See include/dt-bindings/rtc/rtc.h for a list of values.
+
   quartz-load-femtofarads:
     description:
       The capacitive load of the quartz(x-tal), expressed in femto
-- 
2.39.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux