Hi, this is a split off from the combined USB/DT Allwinner F1C100s support series[1], with just the (MUSB) USB patches. There were no code changes in v5 or v6, those are just rebases and resends. ============================ This patchset introduces support for the F1C100s USB controller, which just consists of a MUSB controller variant and some USB PHY. The USB PHY support bits are already in -next. Patch 1 adds the compatible string to the binding, patch 2 introduces that compatible string to the driver, and lets it pick the appropriate flags. As this came up in reviews, patch 3 cleans up the SoC specific configuration bits in the driver, to make future additions easier. Please have a look and apply, if possible. Cheers, Andre. [1] https://lore.kernel.org/linux-arm-kernel/20230111015332.172021-1-andre.przywara@xxxxxxx/ Changelog v5 ... v6: - just keep MUSB driver and binding patches - add Jernej's Reviewed-by: - Rebase on top of gregkh/usb/usb-next Changelog v4 ... v5: - Rebase on top to v6.2-rc1 Changelog v3 ... v4: - Dropped the PHY patches, they go via a different tree and need a different base - rebased on top of linux-sunxi/sunxi/for-next (provides H616 USB) - musb DT binding: use enum - musb cleanup: use musb_hdrc_config config pointer directly - musb cleanup: use const where possible - drop partitions from Popstick DTS file - clarify Popstick has a USB type-A *plug* - add tags Changelog v2 ... v3: - remove redundant "Device Tree Bindings" suffix in DT binding doc title - add BSD license to binding doc file (as per checkpatch) - fix some commit message title prefixes - use proper plural spelling for usb0_id_det-gpios - popstick.dts: Reorder otg_sram node reference alphabetically - popstick.dts: Add regulator- prefix to 3.3V regulator node name - popstick.dts: Fix status, compatible and reg property order - popstick.dts: Drop unneeded mmc0 and spi0 aliases - add patch to clean up sunxi MUSB driver - add Acks and Reviewed-by's Changelog v1 ... v2: - USB PHY binding: clarify the relation with other phy-sun4i-usb bindings - Add Popstick binding and .dts patches Andre Przywara (1): usb: musb: sunxi: Introduce config struct Icenowy Zheng (2): dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string usb: musb: sunxi: add support for the F1C100s MUSB controller .../usb/allwinner,sun4i-a10-musb.yaml | 10 +- drivers/usb/musb/sunxi.c | 99 +++++++++++++------ 2 files changed, 76 insertions(+), 33 deletions(-) -- 2.25.1
