Hello Ishikawa-san,
On Wed, Feb 01, 2023 at 02:02:43AM +0000, yuji2.ishikawa@xxxxxxxxxxxxx wrote:
> Hello Sakari,
>
> Sorry for sending the reply again.
> My mail agent posted the previous one with HTML format.
>
> Thank you for reviewing and your comments.
>
> > -----Original Message-----
> > From: Sakari Ailus sakari.ailus@xxxxxx
> > Sent: Wednesday, January 18, 2023 7:40 AM
> > To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > yuji2.ishikawa@xxxxxxxxxxxxx
> > Cc: Hans Verkuil hverkuil@xxxxxxxxx; Laurent Pinchart
> > laurent.pinchart@xxxxxxxxxxxxxxxx; Mauro Carvalho Chehab
> > mchehab@xxxxxxxxxx; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> > nobuhiro1.iwamatsu@xxxxxxxxxxxxx; Rob Herring robh+dt@xxxxxxxxxx;
> > Krzysztof Kozlowski krzysztof.kozlowski+dt@xxxxxxxxxx; Rafael J . Wysocki
> > rafael.j.wysocki@xxxxxxxxx; Mark Brown broonie@xxxxxxxxxx;
> > linux-media@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v5 2/6] media: platform: visconti: Add Toshiba Visconti
> > Video Input Interface driver
[snip]
> > > diff --git a/drivers/media/platform/visconti/hwd_viif_reg.h b/drivers/media/platform/visconti/hwd_viif_reg.h
> > > new file mode 100644
> > > index 00000000000..b7f43c5fe95
> > > --- /dev/null
> > > +++ b/drivers/media/platform/visconti/hwd_viif_reg.h
> > > @@ -0,0 +1,2802 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
> > > +/* Toshiba Visconti Video Capture Support
> > > + *
> > > + * (C) Copyright 2022 TOSHIBA CORPORATION
> > > + * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
> > > + */
> > > +
> > > +#ifndef HWD_VIIF_REG_H
> > > +#define HWD_VIIF_REG_H
> > > +
> > > +/**
> > > + * struct hwd_viif_csi2host_reg - Registers for VIIF CSI2HOST control
> > > + */
> > > +struct hwd_viif_csi2host_reg {
> > > + u32 RESERVED_A_1;
> > > + u32 CSI2RX_NLANES;
> > > + u32 CSI2RX_RESETN;
> > > + u32 CSI2RX_INT_ST_MAIN;
> > > + u32 CSI2RX_DATA_IDS_1;
> > > + u32 CSI2RX_DATA_IDS_2;
> > > + u32 RESERVED_B_1[10];
> > > + u32 CSI2RX_PHY_SHUTDOWNZ;
> > > + u32 CSI2RX_PHY_RSTZ;
> > > + u32 CSI2RX_PHY_RX;
> > > + u32 CSI2RX_PHY_STOPSTATE;
> > > + u32 CSI2RX_PHY_TESTCTRL0;
> > > + u32 CSI2RX_PHY_TESTCTRL1;
> > > + u32 RESERVED_B_2[34];
> > > + u32 CSI2RX_INT_ST_PHY_FATAL;
> > > + u32 CSI2RX_INT_MSK_PHY_FATAL;
> > > + u32 CSI2RX_INT_FORCE_PHY_FATAL;
> > > + u32 RESERVED_B_3[1];
> > > + u32 CSI2RX_INT_ST_PKT_FATAL;
> > > + u32 CSI2RX_INT_MSK_PKT_FATAL;
> > > + u32 CSI2RX_INT_FORCE_PKT_FATAL;
> > > + u32 RESERVED_B_4[1];
> > > + u32 CSI2RX_INT_ST_FRAME_FATAL;
> > > + u32 CSI2RX_INT_MSK_FRAME_FATAL;
> > > + u32 CSI2RX_INT_FORCE_FRAME_FATAL;
> > > + u32 RESERVED_B_5[1];
> > > + u32 CSI2RX_INT_ST_PHY;
> > > + u32 CSI2RX_INT_MSK_PHY;
> > > + u32 CSI2RX_INT_FORCE_PHY;
> > > + u32 RESERVED_B_6[1];
> > > + u32 CSI2RX_INT_ST_PKT;
> > > + u32 CSI2RX_INT_MSK_PKT;
> > > + u32 CSI2RX_INT_FORCE_PKT;
> > > + u32 RESERVED_B_7[1];
> > > + u32 CSI2RX_INT_ST_LINE;
> > > + u32 CSI2RX_INT_MSK_LINE;
> > > + u32 CSI2RX_INT_FORCE_LINE;
> > > + u32 RESERVED_B_8[113];
> > > + u32 RESERVED_A_2;
> > > + u32 RESERVED_A_3;
> > > + u32 RESERVED_A_4;
> > > + u32 RESERVED_A_5;
> > > + u32 RESERVED_A_6;
> > > + u32 RESERVED_B_9[58];
> > > + u32 RESERVED_A_7;
> >
> > These should be lower case, they're struct members.
> >
> > This way of defining a hardware register interface is highly
> > unconventional. I'm not saying no to it, not now at least, but something
> > should be done to make this more robust against accidental changes: adding
> > a field in the middle changes the address of anything that comes after it,
> > and it's really difficult to say from the code alone that the address of a
> > given register is what it's intended to be. Maybe pahole would still help?
> > But some documentation would be needed in that case.
> >
> > I wonder what others think.
>
> I understand the risk.
> I'll remove these struct-style definition and introduce macro style definition.
> I've hesitated this migration simply because it seemed difficult to complete without any defects
> especially on calculating the offset of each member.
> I try find a series of operations that will complete the migration safely.
I agree with you about the migration risk. Maybe a script that parses
the header file and generates macros would take less time to implement
than doing it manually, and would be safer ?
> > > +};
> > > +
--
Regards,
Laurent Pinchart
