On 01/02/2023 09:02, Jun Nie wrote:
> Cache Coherent Interconnect (CCI) is used by some Qualcomm SoCs. This
> driver is introduced so that its freqency can be adjusted. And regulator
> associated with opp table can be also adjusted accordingly which is
> shared with cpu cluster.
Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.
You need to Cc Qualcomm subarch maintainers.
>
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> ---
> drivers/devfreq/Kconfig | 9 +++
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/qcom-cci.c | 162 +++++++++++++++++++++++++++++++++++++
Who is going to maintain this file/driver?
> 3 files changed, 172 insertions(+)
> create mode 100644 drivers/devfreq/qcom-cci.c
>
(...)
> +
> +static int qcom_cci_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct qcom_cci *priv;
> + const char *gov = DEVFREQ_GOV_USERSPACE;
> + struct device_node *np = dev->of_node;
> + struct nvmem_cell *speedbin_nvmem;
> + int ret;
> + u32 version;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(priv->clk)) {
> + ret = PTR_ERR(priv->clk);
> + dev_err(dev, "failed to fetch clk: %d\n", ret);
> + return ret;
All these are just return dev_err_probe
> + }
> + platform_set_drvdata(pdev, priv);
> +
> + /* Check whether we have profiled speed version per chip */
> + speedbin_nvmem = of_nvmem_cell_get(np, NULL);
> + if (IS_ERR(speedbin_nvmem))
> + return PTR_ERR(speedbin_nvmem);
> +
> + version = qcom_get_dev_version(speedbin_nvmem);
> + dev_info(dev, "%s: set opp table version 0x%x\n", __func__, version);
Drop __func__.
> +
> + nvmem_cell_put(speedbin_nvmem);
> + ret = dev_pm_opp_set_supported_hw(dev, &version, 1);
> + if (ret) {
> + dev_err(dev, "Failed to set supported hardware\n");
return dev_err_probe
> + return ret;
> + }
> +
> + ret = dev_pm_opp_of_add_table(dev);
> + if (ret < 0) {
> + dev_err(dev, "failed to get OPP table\n");
> + return ret;
return dev_err_probe
> + }
> +
> + priv->profile.target = qcom_cci_target;
> + priv->profile.exit = qcom_cci_exit;
> + priv->profile.get_cur_freq = qcom_cci_get_cur_freq;
> + priv->profile.initial_freq = clk_get_rate(priv->clk);
> +
> + priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
> + gov, NULL);
> + if (IS_ERR(priv->devfreq)) {
> + ret = PTR_ERR(priv->devfreq);
> + dev_err(dev, "failed to add devfreq device: %d\n", ret);
ret = dev_err_probe
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + dev_pm_opp_of_remove_table(dev);
> + return ret;
> +}
> +
> +static const struct of_device_id qcom_cci_of_match[] = {
> + { .compatible = "qcom,msm8939-cci"},
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_cci_of_match);
> +
> +static struct platform_driver qcom_cci_platdrv = {
> + .probe = qcom_cci_probe,
> + .driver = {
> + .name = "qcom-cci-devfreq",
> + .of_match_table = qcom_cci_of_match,
> + },
> +};
> +module_platform_driver(qcom_cci_platdrv);
> +
> +MODULE_DESCRIPTION("QCOM cci frequency scaling driver");
> +MODULE_AUTHOR("Jun Nie <jun.nie@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
Best regards,
Krzysztof
