Re: [PATCH 2/2] media: i2c: imx290: Add support for the mono sensor variant.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dave,

Am Dienstag, 31. Januar 2023, 20:07:00 CET schrieb Dave Stevenson:
> The IMX290 module is available as either mono or colour (Bayer).
> 
> Update the driver so that it can advertise the correct mono
> formats instead of the colour ones.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/imx290.c | 47 ++++++++++++++++++++++++--------------
>  1 file changed, 30 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index 49d6c8bdec41..a370f1102334 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -13,6 +13,7 @@
>  #include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/module.h>
> +#include <linux/of_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/regmap.h>
>  #include <linux/regulator/consumer.h>
> @@ -177,6 +178,7 @@ struct imx290 {
>  	struct clk *xclk;
>  	struct regmap *regmap;
>  	u8 nlanes;
> +	u8 mono;
> 
>  	struct v4l2_subdev sd;
>  	struct media_pad pad;
> @@ -414,7 +416,8 @@ static inline int imx290_modes_num(const struct imx290
> *imx290) }
> 
>  struct imx290_format_info {
> -	u32 code;
> +	/* Array of codes. [0] is for colour, [1] is for mono. */
> +	u32 code[2];

Please use a define for that.

>  	u8 bpp;
>  	const struct imx290_regval *regs;
>  	unsigned int num_regs;
> @@ -422,26 +425,27 @@ struct imx290_format_info {
> 
>  static const struct imx290_format_info imx290_formats[] = {
>  	{
> -		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
> +		.code = { MEDIA_BUS_FMT_SRGGB10_1X10, 
MEDIA_BUS_FMT_Y10_1X10 },
>  		.bpp = 10,
>  		.regs = imx290_10bit_settings,
>  		.num_regs = ARRAY_SIZE(imx290_10bit_settings),
>  	}, {
> -		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
> +		.code = { MEDIA_BUS_FMT_SRGGB12_1X12, 
MEDIA_BUS_FMT_Y12_1X12 },
>  		.bpp = 12,
>  		.regs = imx290_12bit_settings,
>  		.num_regs = ARRAY_SIZE(imx290_12bit_settings),
>  	}
>  };
> 
> -static const struct imx290_format_info *imx290_format_info(u32 code)
> +static const struct imx290_format_info *
> +imx290_format_info(const struct imx290 *imx290, u32 code)
>  {
>  	unsigned int i;
> 
>  	for (i = 0; i < ARRAY_SIZE(imx290_formats); ++i) {
>  		const struct imx290_format_info *info = 
&imx290_formats[i];
> 
> -		if (info->code == code)
> +		if (info->code[imx290->mono] == code)
>  			return info;
>  	}
> 
> @@ -536,7 +540,7 @@ static int imx290_set_black_level(struct imx290 *imx290,
> const struct v4l2_mbus_framefmt *format,
>  				  unsigned int black_level, int *err)
>  {
> -	unsigned int bpp = imx290_format_info(format->code)->bpp;
> +	unsigned int bpp = imx290_format_info(imx290, format->code)->bpp;
> 
>  	return imx290_write(imx290, IMX290_BLKLEVEL,
>  			    black_level >> (16 - bpp), err);
> @@ -548,7 +552,7 @@ static int imx290_setup_format(struct imx290 *imx290,
>  	const struct imx290_format_info *info;
>  	int ret;
> 
> -	info = imx290_format_info(format->code);
> +	info = imx290_format_info(imx290, format->code);
> 
>  	ret = imx290_set_register_array(imx290, info->regs, info->num_regs);
>  	if (ret < 0) {
> @@ -844,10 +848,12 @@ static int imx290_enum_mbus_code(struct v4l2_subdev
> *sd, struct v4l2_subdev_state *sd_state,
>  				 struct v4l2_subdev_mbus_code_enum 
*code)
>  {
> +	const struct imx290 *imx290 = to_imx290(sd);
> +
>  	if (code->index >= ARRAY_SIZE(imx290_formats))
>  		return -EINVAL;
> 
> -	code->code = imx290_formats[code->index].code;
> +	code->code = imx290_formats[code->index].code[imx290->mono];
> 
>  	return 0;
>  }
> @@ -859,7 +865,7 @@ static int imx290_enum_frame_size(struct v4l2_subdev
> *sd, const struct imx290 *imx290 = to_imx290(sd);
>  	const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290);
> 
> -	if (!imx290_format_info(fse->code))
> +	if (!imx290_format_info(imx290, fse->code))
>  		return -EINVAL;
> 
>  	if (fse->index >= imx290_modes_num(imx290))
> @@ -888,8 +894,8 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
>  	fmt->format.width = mode->width;
>  	fmt->format.height = mode->height;
> 
> -	if (!imx290_format_info(fmt->format.code))
> -		fmt->format.code = imx290_formats[0].code;
> +	if (!imx290_format_info(imx290, fmt->format.code))
> +		fmt->format.code = imx290_formats[0].code[imx290->mono];
> 
>  	fmt->format.field = V4L2_FIELD_NONE;
> 
> @@ -1177,16 +1183,29 @@ static s64 imx290_check_link_freqs(const struct
> imx290 *imx290, return 0;
>  }
> 
> +static const struct of_device_id imx290_of_match[] = {
> +	{ .compatible = "sony,imx290" },
> +	{ .compatible = "sony,imx290-mono", .data = (void *)1 },

Would you mind using a model specific struct? I have a patch on my stack 
adding support for imx327. There are some imx327 specific writes to registers 
during initialization. I do not mind adding this struct later though.

Best regards
Alexander

> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx290_of_match);
> +
>  static int imx290_parse_dt(struct imx290 *imx290)
>  {
> +	struct i2c_client *client = to_i2c_client(imx290->dev);
>  	/* Only CSI2 is supported for now: */
>  	struct v4l2_fwnode_endpoint ep = {
>  		.bus_type = V4L2_MBUS_CSI2_DPHY
>  	};
> +	const struct of_device_id *match;
>  	struct fwnode_handle *endpoint;
>  	int ret;
>  	s64 fq;
> 
> +	match = i2c_of_match_device(imx290_of_match, client);
> +	if (match)
> +		imx290->mono = match->data ? 1 : 0;
> +
>  	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(imx290->dev), 
NULL);
>  	if (!endpoint) {
>  		dev_err(imx290->dev, "Endpoint node not found\n");
> @@ -1351,12 +1370,6 @@ static void imx290_remove(struct i2c_client *client)
>  	pm_runtime_set_suspended(imx290->dev);
>  }
> 
> -static const struct of_device_id imx290_of_match[] = {
> -	{ .compatible = "sony,imx290" },
> -	{ /* sentinel */ }
> -};
> -MODULE_DEVICE_TABLE(of, imx290_of_match);
> -
>  static struct i2c_driver imx290_i2c_driver = {
>  	.probe_new  = imx290_probe,
>  	.remove = imx290_remove,







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux