Re: [PATCH V3 6/7] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30.01.2023 13:55, devi priya wrote:
> Add initial device tree support for Qualcomm IPQ9574 SoC
> and AL02 board
> 
> Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
> Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> ---
>  Changes in V3:
>         - Updated the order of signed-offs
> 
>  Changes in V2:
>         - Updated the node name - emmc_pins to sdc_default_state
>         - Moved the xo and sleep clock frequency to board DT
>         - Removed the pipe clock definitions
>         - Dropped clock frequency property for timer nodes
>         - Added qcom,ipq9574-sdhci compatible string 
>         - Updated the copyright year to 2023
>         - Corrected the indentations
> 
>  arch/arm64/boot/dts/qcom/Makefile            |   1 +
>  arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
>  3 files changed, 364 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b0423ca3e79f..ff40e86181d4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> new file mode 100644
> index 000000000000..4aa06e4f63c7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ9574 AL02-C7 board device tree source
> + *
> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq9574.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
> +	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
> +
> +	aliases {
> +		serial0 = &blsp1_uart2;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&blsp1_uart2 {
> +	pinctrl-0 = <&uart2_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&sdhc_1 {
> +	pinctrl-0 = <&sdc_default_state>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&sleep_clk {
> +	clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> +	sdc_default_state: sdc-default-state {
> +		clk-pins {
> +			pins = "gpio5";
> +			function = "sdc_clk";
> +			drive-strength = <8>;
> +			bias-disable;
> +		};
> +
> +		cmd-pins {
> +			pins = "gpio4";
> +			function = "sdc_cmd";
> +			drive-strength = <8>;
> +			bias-pull-up;
> +		};
> +
> +		data-pins {
> +			pins = "gpio0", "gpio1", "gpio2",
> +				"gpio3", "gpio6", "gpio7",
> +				"gpio8", "gpio9";
The second and third rows are still incorrectly indented.

> +			function = "sdc_data";
> +			drive-strength = <8>;
> +			bias-pull-up;
> +		};
> +
> +		rclk-pins {
> +			pins = "gpio10";
> +			function = "sdc_rclk";
> +			drive-strength = <8>;
> +			bias-pull-down;
> +		};
> +	};

[...]

> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		tz_region: memory@4a600000 {
tz@

> +			reg = <0x0 0x4a600000 0x0 0x400000>;
> +			no-map;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +		compatible = "simple-bus";
compatible first, please

> +
> +		tlmm: pinctrl@1000000 {
> +			compatible = "qcom,ipq9574-tlmm";
> +			reg = <0x01000000 0x300000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 65>;
> +			gpio-reserved-ranges = <59 1>;
It's reserved in the pinctrl driver, no need to do it again here.


> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			uart2_pins: uart2-state {
> +				pins = "gpio34", "gpio35";

[...]

> +
> +		intc: interrupt-controller@b000000 {
> +			compatible = "qcom,msm-qgic2";
> +			reg = <0x0b000000 0x1000>,  /* GICD */
> +			      <0x0b002000 0x1000>,  /* GICC */
> +			      <0x0b001000 0x1000>,  /* GICH */
> +			      <0x0b004000 0x1000>;  /* GICV */
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			ranges = <0 0x0b00c000 0x3000>;
> +
> +			v2m0: v2m@0 {
> +				compatible = "arm,gic-v2m-frame";
> +				reg = <0x0 0xffd>;
> +				msi-controller;
> +			};
> +
> +			v2m1: v2m@1 {
> +				compatible = "arm,gic-v2m-frame";
> +				reg = <0x00001000 0xffd>;
Unit address must match the address part of the reg property.

> +				msi-controller;
> +			};
> +
> +			v2m2: v2m@2 {
And here.

Konrad
> +				compatible = "arm,gic-v2m-frame";
> +				reg = <0x00002000 0xffd>;
> +				msi-controller;
> +			};
> +		};
> +
> +		timer@b120000 {
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x0b120000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			frame@b120000 {
> +				reg = <0x0b121000 0x1000>,
> +				      <0x0b122000 0x1000>;
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +
> +			frame@b123000 {
> +				reg = <0x0b123000 0x1000>;
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@b124000 {
> +				reg = <0x0b124000 0x1000>;
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@b125000 {
> +				reg = <0x0b125000 0x1000>;
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@b126000 {
> +				reg = <0x0b126000 0x1000>;
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@b127000 {
> +				reg = <0x0b127000 0x1000>;
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@b128000 {
> +				reg = <0x0b128000 0x1000>;
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux