On Thu, Jan 26, 2023 at 09:32:13AM +0100, Herve Codina wrote: > Add support for the time slot assigner (TSA) > available in some PowerQUICC SoC such as MPC885 > or MPC866. > > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> > --- > .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 261 ++++++++++++++++++ fsl,cpm1-tsa.yaml > include/dt-bindings/soc/fsl,tsa.h | 13 + > 2 files changed, 274 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml > create mode 100644 include/dt-bindings/soc/fsl,tsa.h > > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml > new file mode 100644 > index 000000000000..d027d4c3cf10 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml > @@ -0,0 +1,261 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PowerQUICC CPM Time-slot assigner (TSA) controller > + > +maintainers: > + - Herve Codina <herve.codina@xxxxxxxxxxx> > + > +description: > + The TSA is the time-slot assigner that can be found on some PowerQUICC SoC. > + Its purpose is to route some TDM time-slots to other internal serial > + controllers. > + > +properties: > + compatible: > + items: > + - enum: > + - fsl,mpc885-tsa > + - fsl,mpc866-tsa > + - const: fsl,cpm1-tsa > + > + reg: > + items: > + - description: SI (Serial Interface) register base > + - description: SI RAM base > + > + reg-names: > + items: > + - const: si_regs > + - const: si_ram > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + '#serial-cells': Not a standard property. What's this for? #.*-cells applies to a specific pattern of properties. > + const: 1 > + > +patternProperties: > + '^tdm@[0-1]$': > + description: > + The TDM managed by this controller > + type: object > + > + additionalProperties: false > + > + properties: > + reg: > + minimum: 0 > + maximum: 1 > + description: > + The TDM number for this TDM, 0 for TDMa and 1 for TDMb > + > + fsl,common-rxtx-pins: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The hardware can use four dedicated pins for Tx clock, Tx sync, Rx > + clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync. > + Without the 'fsl,common-rxtx-pins' property, the four pins are used. > + With the 'fsl,common-rxtx-pins' property, two pins are used. > + > + clocks: > + minItems: 2 > + items: > + - description: External clock connected to L1RSYNC pin > + - description: External clock connected to L1RCLK pin > + - description: External clock connected to L1TSYNC pin > + - description: External clock connected to L1TCLK pin > + clock-names: > + minItems: 2 > + items: > + - const: l1rsync > + - const: l1rclk > + - const: l1tsync > + - const: l1tclk > + > + fsl,diagnostic-mode: > + $ref: /schemas/types.yaml#/definitions/string > + enum: [disabled, echo, internal-loopback, control-loopback] Seems like you would want userspace control of this, not have to make firmware changes and reboot to change. > + default: disabled > + description: | > + The diagnostic mode can be used to diagnose some communication issues. > + It should not be set (or set to 'disabled') when diagnostic is not > + needed. > + Diagnostic mode: > + - disabled: > + Diagnostic disabled (ie. normal operation) > + - echo: > + Automatic echo. Rx data is resent on Tx. > + - internal-loopback: > + The TDM transmitter is connected to the receiver. Data appears > + on Tx pin. > + - control-loopback: > + The TDM transmitter is connected to the receiver. The Tx pin is > + disconnected. > + > + fsl,rx-frame-sync-delay-bits: > + enum: [0, 1, 2, 3] > + default: 0 > + description: | > + Receive frame sync delay in number of bits. > + Indicates the delay between the Rx sync and the first bit of the Rx > + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. > + > + fsl,tx-frame-sync-delay-bits: > + enum: [0, 1, 2, 3] > + default: 0 > + description: | > + Transmit frame sync delay in number of bits. > + Indicates the delay between the Tx sync and the first bit of the Tx > + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. > + > + fsl,clock-falling-edge: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Data is sent on falling edge of the clock (and received on the rising > + edge). If 'clock-falling-edge' is not present, data is sent on the > + rising edge (and received on the falling edge). > + > + fsl,fsync-rising-edge: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Frame sync pulses are sampled with the rising edge of the channel > + clock. If 'fsync-rising-edge' is not present, pulses are sampled with > + the falling edge. > + > + fsl,double-speed-clock: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The channel clock is twice the data rate. > + > + fsl,tx-ts-routes: > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + description: | > + A list of tupple that indicates the Tx time-slots routes. tuple > + tx_ts_routes = Not the property name. Put an example in the example(s). > + < 2 0 >, /* The first 2 time slots are not used */ > + < 3 1 >, /* The next 3 ones are route to SCC2 */ > + < 4 0 >, /* The next 4 ones are not used */ > + < 2 2 >; /* The nest 2 ones are route to SCC3 */ > + items: > + items: > + - description: > + The number of time-slots > + minimum: 1 > + maximum: 64 > + - description: | > + The source serial interface (dt-bindings/soc/fsl,tsa.h defines > + these values) > + - 0: No destination > + - 1: SCC2 > + - 2: SCC3 > + - 3: SCC4 > + - 4: SMC1 > + - 5: SMC2 > + enum: [0, 1, 2, 3, 4, 5] > + minItems: 1 > + maxItems: 64 > + > + fsl,rx-ts-routes: You could make these a pattern instead of duplicating the constraints: '^fsl,[rt]x-ts-routes$' > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + description: | > + A list of tupple that indicates the Rx time-slots routes. > + tx_ts_routes = > + < 2 0 >, /* The first 2 time slots are not used */ > + < 3 1 >, /* The next 3 ones are route from SCC2 */ > + < 4 0 >, /* The next 4 ones are not used */ > + < 2 2 >; /* The nest 2 ones are route from SCC3 */ > + items: > + items: > + - description: > + The number of time-slots > + minimum: 1 > + maximum: 64 > + - description: | > + The destination serial interface (dt-bindings/soc/fsl,tsa.h > + defines these values) > + - 0: No destination > + - 1: SCC2 > + - 2: SCC3 > + - 3: SCC4 > + - 4: SMC1 > + - 5: SMC2 > + enum: [0, 1, 2, 3, 4, 5] > + minItems: 1 > + maxItems: 64 > + > + allOf: > + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. > + # Else, the 4 clocks must be present. > + - if: > + required: > + - fsl,common-rxtx-pins > + then: > + properties: > + clocks: > + maxItems: 2 > + clock-names: > + maxItems: 2 > + else: > + properties: > + clocks: > + minItems: 4 > + clock-names: > + minItems: 4 > + > + required: > + - reg > + - clocks > + - clock-names > + > +required: > + - compatible > + - reg > + - reg-names > + - '#address-cells' > + - '#size-cells' > + - '#serial-cells' > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/fsl,tsa.h> > + > + tsa@ae0 { > + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; > + reg = <0xae0 0x10>, > + <0xc00 0x200>; > + reg-names = "si_regs", "si_ram"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + #serial-cells = <1>; > + > + tdm@0 { > + /* TDMa */ > + reg = <0>; > + > + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; > + clock-names = "l1rsync", "l1rclk"; > + > + fsl,common-rxtx-pins; > + fsl,fsync-rising-edge; > + > + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ > + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ > + < 1 0 >, /* TS 26 */ > + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ > + > + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ > + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ > + < 1 0 >, /* TS 26 */ > + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ > + }; > + }; > diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h > new file mode 100644 > index 000000000000..2cc44e867dbe > --- /dev/null > +++ b/include/dt-bindings/soc/fsl,tsa.h > @@ -0,0 +1,13 @@ > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ > + > +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H > +#define __DT_BINDINGS_SOC_FSL_TSA_H > + > +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ > +#define FSL_CPM_TSA_SCC2 1 > +#define FSL_CPM_TSA_SCC3 2 > +#define FSL_CPM_TSA_SCC4 3 > +#define FSL_CPM_TSA_SMC1 4 > +#define FSL_CPM_TSA_SMC2 5 > + > +#endif > -- > 2.39.0 >
