current(?) imx8mm EVKs come with a different PMIC: used to be "rohm,bd71847", which is now replaced by "nxp,pca9450a" on the LPDDR4 variant at least the register settings etc where "backported" from current u-boot sources for the EVK Note: not sure if the changes should go in the ddr4-evk.dts or elsewhere; what about backwards compatibility? = users/holders of the EVKs with the bd71847 IC? changes with V11: correct (?) regulator min/max from: 8MMINILPD4-CPU SPF-31399_C2.pdf changes with V10: - keep rhom-pic node untouched, for the "old" evks, and delete+replace the node in the newer evks = EVKB - migrate voltage levels set for the rhom to the nxp pmic changes with V9: drop 'rev b' references changes with V8: rewording of commit messages, to reference "EVKB" instead of "rev-b" changes with V7: add missing "acked-by" tag (finally) add missing makefile entry for imx8mm-evbk.dtb changes with V6: move A53 cpu-supply nodes back into imx8mm-evk.dtsi rewording of commit messages fix syntax error during compile changes with V5: split of bindings into separate commit rewording of commit messages changes with V4: deduplicate rohm-pmic into one dtsi changes with V3: split changes into multiple commits removed unused header changes with V2: reshuffle common nodes into the imx8mm-evk.dtsi, and only keeping the pmic related parts separate Johannes Schneider (1): arm64: dts: imx8mm: set PCA9450a as PMIC .../boot/dts/freescale/imx8mm-ddr4-evk.dts | 124 ++++++++++++++++++ 1 file changed, 124 insertions(+) -- 2.25.1
