Re: [PATCH v9 03/27] gunyah: Common types and error codes for Gunyah hypercalls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 20, 2023 at 02:46:02PM -0800, Elliot Berman wrote:
> Add architecture-independent standard error codes, types, and macros for
> Gunyah hypercalls.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
> ---
>  MAINTAINERS            |  1 +
>  include/linux/gunyah.h | 74 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 75 insertions(+)
>  create mode 100644 include/linux/gunyah.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d9205cb9e988..f1e07e39b2f5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9048,6 +9048,7 @@ L:	linux-arm-msm@xxxxxxxxxxxxxxx
>  S:	Supported
>  F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
>  F:	Documentation/virt/gunyah/
> +F:	include/linux/gunyah.h
>  
>  HABANALABS PCI DRIVER
>  M:	Oded Gabbay <ogabbay@xxxxxxxxxx>
> diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
> new file mode 100644
> index 000000000000..985c6086348e
> --- /dev/null
> +++ b/include/linux/gunyah.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _LINUX_GUNYAH_H
> +#define _LINUX_GUNYAH_H
> +
> +#include <linux/errno.h>
> +#include <linux/limits.h>
> +
> +/* Common Gunyah macros */

Macros?

> +#define GH_CAPID_INVAL	U64_MAX
> +#define GH_VMID_ROOT_VM	0xff

These are all simple defines :)

> +
> +#define GH_ERROR_OK			0
> +
> +#define GH_ERROR_UNIMPLEMENTED		-1
> +#define GH_ERROR_RETRY			-2

All of these values, they come from the hypervisor?

And then you:

> +static inline int gh_remap_error(int gh_error)
> +{
> +	switch (gh_error) {
> +	case GH_ERROR_OK:
> +		return 0;
> +	case GH_ERROR_NOMEM:
> +		return -ENOMEM;
> +	case GH_ERROR_DENIED:
> +	case GH_ERROR_CSPACE_CAP_NULL:
> +	case GH_ERROR_CSPACE_CAP_REVOKED:
> +	case GH_ERROR_CSPACE_WRONG_OBJ_TYPE:
> +	case GH_ERROR_CSPACE_INSUF_RIGHTS:
> +	case GH_ERROR_CSPACE_FULL:
> +		return -EACCES;
> +	case GH_ERROR_BUSY:
> +	case GH_ERROR_IDLE:
> +		return -EBUSY;
> +	case GH_ERROR_IRQ_BOUND:
> +	case GH_ERROR_IRQ_UNBOUND:
> +	case GH_ERROR_MSGQUEUE_FULL:
> +	case GH_ERROR_MSGQUEUE_EMPTY:
> +		return -EPERM;
> +	default:
> +		return -EINVAL;
> +	}
> +}

Convert it to a Linux-kernel related value?

If so, please say that in the documentation here (where the value came
from, etc...)

Also, why isn't gh_error an enumerated type so you can have some type
safety and it's obvious when a value comes from the hypervisor what it
should be and should not be.

thanks,

greg k-h



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux