Adds compatibility with the new sensor generation, the BMP580. The measurement and initialization codepaths are adapted from the device datasheet and the repository from manufacturer at https://github.com/boschsensortec/BMP5-Sensor-API. Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx> diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index cec4b429cd64..02b97e89de50 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -17,14 +17,14 @@ config ABP060MG will be called abp060mg. config BMP280 - tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor driver" + tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) help - Say yes here to build support for Bosch Sensortec BMP180, BMP280 and - BMP380 pressure and temperature sensors. Also supports the BME280 with + Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 + and BMP580 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 22addaaa5393..c65fb4025ad9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -13,6 +13,7 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * * Notice: * The link to the bmp180 datasheet points to an outdated version missing these changes: @@ -71,6 +72,41 @@ enum bmp380_odr { BMP380_ODR_0_0015HZ, }; +enum bmp580_odr { + BMP580_ODR_240HZ, + BMP580_ODR_218HZ, + BMP580_ODR_199HZ, + BMP580_ODR_179HZ, + BMP580_ODR_160HZ, + BMP580_ODR_149HZ, + BMP580_ODR_140HZ, + BMP580_ODR_129HZ, + BMP580_ODR_120HZ, + BMP580_ODR_110HZ, + BMP580_ODR_100HZ, + BMP580_ODR_89HZ, + BMP580_ODR_80HZ, + BMP580_ODR_70HZ, + BMP580_ODR_60HZ, + BMP580_ODR_50HZ, + BMP580_ODR_45HZ, + BMP580_ODR_40HZ, + BMP580_ODR_35HZ, + BMP580_ODR_30HZ, + BMP580_ODR_25HZ, + BMP580_ODR_20HZ, + BMP580_ODR_15HZ, + BMP580_ODR_10HZ, + BMP580_ODR_5HZ, + BMP580_ODR_4HZ, + BMP580_ODR_3HZ, + BMP580_ODR_2HZ, + BMP580_ODR_1HZ, + BMP580_ODR_0_5HZ, + BMP580_ODR_0_25HZ, + BMP580_ODR_0_125HZ, +}; + /* * These enums are used for indexing into the array of compensation * parameters for BMP280. @@ -1216,6 +1252,303 @@ const struct bmp280_chip_info bmp380_chip_info = { }; EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); +/* + * BMP5xx soft reset procedure + */ +static int bmp580_soft_reset(struct bmp280_data *data) +{ + unsigned int reg; + int ret; + + /* Write reset word to CMD register */ + ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_SOFT_RESET); + if (ret) { + dev_err(data->dev, "failed to send reset command to device\n"); + return ret; + } + /* Wait 2ms for reset completion */ + usleep_range(2000, 2500); + + /* Dummy read of chip_id */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) { + dev_err(data->dev, "failed to reestablish comms after reset\n"); + return ret; + } + + /* Check if POR bit is set on interrupt reg */ + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, ®); + if (ret) { + dev_err(data->dev, "error reading interrupt status register\n"); + return ret; + } + if (!(reg & BMP580_INT_STATUS_POR_MASK)) { + dev_err(data->dev, "error resetting sensor\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Contrary to previous sensors families, compensation algorithm is builtin. + * We are only required to read the register raw data and adapt the ranges + * for what is expected on IIO ABI. + */ + +static int bmp580_read_temp(struct bmp280_data *data, int *val) +{ + s32 raw_temp; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read temperature\n"); + return ret; + } + + raw_temp = get_unaligned_le24(data->buf); + if (raw_temp == BMP580_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } + + /* + * Temperature is returned in Celsius degrees in fractional + * form down 2^16. We reescale by x1000 to return milli Celsius + * to respect IIO ABI. + */ + *val = (raw_temp * 1000) >> 16; + return IIO_VAL_INT; +} + +static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) +{ + u32 raw_press; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf, + sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read pressure\n"); + return ret; + } + + raw_press = get_unaligned_le24(data->buf); + if (raw_press == BMP580_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } + /* + * Pressure is returned in Pascals in fractional form down 2^16. + * We reescale /1000 to convert to kilopascal to respect IIO ABI. + */ + *val = raw_press; + *val2 = 64000; /* 2^6 * 1000 */ + return IIO_VAL_FRACTIONAL; +} + +static const int bmp580_odr_table[][2] = { + [BMP580_ODR_240HZ] = {240, 0}, + [BMP580_ODR_218HZ] = {218, 0}, + [BMP580_ODR_199HZ] = {199, 0}, + [BMP580_ODR_179HZ] = {179, 0}, + [BMP580_ODR_160HZ] = {160, 0}, + [BMP580_ODR_149HZ] = {149, 0}, + [BMP580_ODR_140HZ] = {140, 0}, + [BMP580_ODR_129HZ] = {129, 0}, + [BMP580_ODR_120HZ] = {120, 0}, + [BMP580_ODR_110HZ] = {110, 0}, + [BMP580_ODR_100HZ] = {100, 0}, + [BMP580_ODR_89HZ] = {89, 0}, + [BMP580_ODR_80HZ] = {80, 0}, + [BMP580_ODR_70HZ] = {70, 0}, + [BMP580_ODR_60HZ] = {60, 0}, + [BMP580_ODR_50HZ] = {50, 0}, + [BMP580_ODR_45HZ] = {45, 0}, + [BMP580_ODR_40HZ] = {40, 0}, + [BMP580_ODR_35HZ] = {35, 0}, + [BMP580_ODR_30HZ] = {30, 0}, + [BMP580_ODR_25HZ] = {25, 0}, + [BMP580_ODR_20HZ] = {20, 0}, + [BMP580_ODR_15HZ] = {15, 0}, + [BMP580_ODR_10HZ] = {10, 0}, + [BMP580_ODR_5HZ] = {5, 0}, + [BMP580_ODR_4HZ] = {4, 0}, + [BMP580_ODR_3HZ] = {3, 0}, + [BMP580_ODR_2HZ] = {2, 0}, + [BMP580_ODR_1HZ] = {1, 0}, + [BMP580_ODR_0_5HZ] = {0, 500000}, + [BMP580_ODR_0_25HZ] = {0, 250000}, + [BMP580_ODR_0_125HZ] = {0, 125000}, +}; + +static int bmp580_preinit(struct bmp280_data *data) +{ + unsigned int reg; + int ret; + + /* Issue soft-reset command */ + ret = bmp580_soft_reset(data); + if (ret) + return ret; + + /* Post powerup sequence */ + ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); + if (ret) + return ret; + + /* Print warn message if we don't know the chip id */ + if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT) + dev_warn(data->dev, "preinit: unexpected chip_id\n"); + + ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®); + if (ret) + return ret; + + /* Check nvm status */ + if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) { + dev_err(data->dev, "preinit: nvm error on powerup sequence\n"); + return -EIO; + } + + return 0; +} + +static int bmp580_chip_config(struct bmp280_data *data) +{ + bool change = false, aux; + unsigned int tmp; + u8 reg_val; + int ret; + + /* Sets sensor in standby mode */ + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS, + BMP580_ODR_DEEPSLEEP_DIS | + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to change sensor to standby mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(2500, 3000); + + /* Set default DSP mode settings */ + reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) | + BMP580_DSP_SHDW_IIR_TEMP_EN | BMP580_DSP_SHDW_IIR_PRESS_EN; + + ret = regmap_update_bits(data->regmap, BMP580_REG_DSP_CONFIG, + BMP580_DSP_COMP_MASK | + BMP580_DSP_SHDW_IIR_TEMP_EN | + BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val); + + /* Configure oversampling */ + reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) | + FIELD_PREP(BMP580_OSR_PRESS_MASK, data->oversampling_press) | + BMP580_OSR_PRESS_EN; + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_OSR_CONFIG, + BMP580_OSR_TEMP_MASK | BMP580_OSR_PRESS_MASK | + BMP580_OSR_PRESS_EN, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write oversampling register\n"); + return ret; + } + change = change || aux; + + /* Configure output data rate */ + ret = regmap_update_bits_check(data->regmap, BMP580_REG_ODR_CONFIG, BMP580_ODR_MASK, + FIELD_PREP(BMP580_ODR_MASK, data->sampling_freq), + &aux); + if (ret) { + dev_err(data->dev, "failed to write ODR configuration register\n"); + return ret; + } + change = change || aux; + + /* Set filter data */ + reg_val = FIELD_PREP(BMP580_DSP_IIR_PRESS_MASK, data->iir_filter_coeff) | + FIELD_PREP(BMP580_DSP_IIR_TEMP_MASK, data->iir_filter_coeff); + + ret = regmap_update_bits_check(data->regmap, BMP580_REG_DSP_IIR, + BMP580_DSP_IIR_PRESS_MASK | + BMP580_DSP_IIR_TEMP_MASK, + reg_val, &aux); + if (ret) { + dev_err(data->dev, "failed to write config register\n"); + return ret; + } + change = change || aux; + + /* Restore sensor to normal operation mode */ + ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK, + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL)); + if (ret) { + dev_err(data->dev, "failed to set normal mode\n"); + return ret; + } + /* From datasheet's table 4: electrical characteristics */ + usleep_range(3000, 3500); + + if (change) { + /* + * Check if ODR and OSR settings are valid or we are + * operating in a degraded mode. + */ + ret = regmap_read(data->regmap, BMP580_REG_EFF_OSR, &tmp); + if (ret) { + dev_err(data->dev, "error reading effective OSR register\n"); + return ret; + } + if (!(tmp & BMP580_EFF_OSR_VALID_ODR)) { + dev_warn(data->dev, "OSR and ODR incompatible settings detected\n"); + /* Set current OSR settings from data on effective OSR */ + data->oversampling_temp = FIELD_GET(BMP580_EFF_OSR_TEMP_MASK, tmp); + data->oversampling_press = FIELD_GET(BMP580_EFF_OSR_PRESS_MASK, tmp); + return -EINVAL; + } + } + + return 0; +} + +static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; + +const struct bmp280_chip_info bmp580_chip_info = { + .id_reg = BMP580_REG_CHIP_ID, + .chip_id = BMP580_CHIP_ID, + .regmap_config = &bmp580_regmap_config, + .start_up_time = 2000, + .channels = bmp380_channels, + .num_channels = 2, + + .oversampling_temp_avail = bmp580_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_temp_default = ilog2(1), + + .oversampling_press_avail = bmp580_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp580_oversampling_avail), + .oversampling_press_default = ilog2(4), + + .sampling_freq_avail = bmp580_odr_table, + .num_sampling_freq_avail = ARRAY_SIZE(bmp580_odr_table) * 2, + .sampling_freq_default = BMP580_ODR_50HZ, + + .iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail, + .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail), + .iir_filter_coeff_default = 2, + + .chip_config = bmp580_chip_config, + .read_temp = bmp580_read_temp, + .read_press = bmp580_read_press, + .preinit = bmp580_preinit, +}; +EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280); + static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) { const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index 5f908e2c9826..567b945e6427 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -34,6 +34,7 @@ static const struct of_device_id bmp280_of_i2c_match[] = { { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, { .compatible = "bosch,bme280", .data = &bme280_chip_info }, { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, + { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); @@ -44,6 +45,7 @@ static const struct i2c_device_id bmp280_i2c_id[] = { {"bmp280", (kernel_ulong_t)&bmp280_chip_info }, {"bme280", (kernel_ulong_t)&bme280_chip_info }, {"bmp380", (kernel_ulong_t)&bmp380_chip_info }, + {"bmp580", (kernel_ulong_t)&bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c index c98c67970265..3ee56720428c 100644 --- a/drivers/iio/pressure/bmp280-regmap.c +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -115,6 +115,54 @@ static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg) } } +static bool bmp580_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_NVM_ADDR: + case BMP580_REG_ODR_CONFIG: + case BMP580_REG_OSR_CONFIG: + case BMP580_REG_INT_SOURCE: + case BMP580_REG_INT_CONFIG: + case BMP580_REG_OOR_THR_MSB: + case BMP580_REG_OOR_THR_LSB: + case BMP580_REG_OOR_CONFIG: + case BMP580_REG_OOR_RANGE: + case BMP580_REG_IF_CONFIG: + case BMP580_REG_FIFO_CONFIG: + case BMP580_REG_FIFO_SEL: + case BMP580_REG_DSP_CONFIG: + case BMP580_REG_DSP_IIR: + case BMP580_REG_CMD: + return true; + default: + return false; + } +} + +static bool bmp580_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP580_REG_NVM_DATA_MSB: + case BMP580_REG_NVM_DATA_LSB: + case BMP580_REG_FIFO_COUNT: + case BMP580_REG_INT_STATUS: + case BMP580_REG_PRESS_XLSB: + case BMP580_REG_PRESS_LSB: + case BMP580_REG_PRESS_MSB: + case BMP580_REG_FIFO_DATA: + case BMP580_REG_TEMP_XLSB: + case BMP580_REG_TEMP_LSB: + case BMP580_REG_TEMP_MSB: + case BMP580_REG_EFF_OSR: + case BMP580_REG_STATUS: + return true; + default: + return false; + } +} + const struct regmap_config bmp280_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -138,3 +186,15 @@ const struct regmap_config bmp380_regmap_config = { .volatile_reg = bmp380_is_volatile_reg, }; EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280); + +const struct regmap_config bmp580_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP580_REG_CMD, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp580_is_writeable_reg, + .volatile_reg = bmp580_is_volatile_reg, +}; +EXPORT_SYMBOL_NS(bmp580_regmap_config, IIO_BMP280); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index d5a224b95185..1dff9bb7c4e9 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -85,6 +85,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, { .compatible = "bosch,bme280", .data = &bmp280_chip_info }, { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, + { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); @@ -95,6 +96,7 @@ static const struct spi_device_id bmp280_spi_id[] = { { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, { "bme280", (kernel_ulong_t)&bmp280_chip_info }, { "bmp380", (kernel_ulong_t)&bmp380_chip_info }, + { "bmp580", (kernel_ulong_t)&bmp580_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, bmp280_spi_id); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index be17104ef0a2..f29d44b09efc 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -6,6 +6,107 @@ #include <linux/regulator/consumer.h> +/* BMP580 specific registers */ +#define BMP580_REG_CMD 0x7E +#define BMP580_REG_EFF_OSR 0x38 +#define BMP580_REG_ODR_CONFIG 0x37 +#define BMP580_REG_OSR_CONFIG 0x36 +#define BMP580_REG_IF_CONFIG 0x13 +#define BMP580_REG_REV_ID 0x02 +#define BMP580_REG_CHIP_ID 0x01 +/* OOR allows to configure a pressure alarm */ +#define BMP580_REG_OOR_CONFIG 0x35 +#define BMP580_REG_OOR_RANGE 0x34 +#define BMP580_REG_OOR_THR_MSB 0x33 +#define BMP580_REG_OOR_THR_LSB 0x32 +/* DSP registers (IIR filters) */ +#define BMP580_REG_DSP_IIR 0x31 +#define BMP580_REG_DSP_CONFIG 0x30 +/* NVM access registers */ +#define BMP580_REG_NVM_DATA_MSB 0x2D +#define BMP580_REG_NVM_DATA_LSB 0x2C +#define BMP580_REG_NVM_ADDR 0x2B +/* Status registers */ +#define BMP580_REG_STATUS 0x28 +#define BMP580_REG_INT_STATUS 0x27 +#define BMP580_REG_CHIP_STATUS 0x11 +/* Data registers */ +#define BMP580_REG_FIFO_DATA 0x29 +#define BMP580_REG_PRESS_MSB 0x22 +#define BMP580_REG_PRESS_LSB 0x21 +#define BMP580_REG_PRESS_XLSB 0x20 +#define BMP580_REG_TEMP_MSB 0x1F +#define BMP580_REG_TEMP_LSB 0x1E +#define BMP580_REG_TEMP_XLSB 0x1D +/* FIFO config registers */ +#define BMP580_REG_FIFO_SEL 0x18 +#define BMP580_REG_FIFO_COUNT 0x17 +#define BMP580_REG_FIFO_CONFIG 0x16 +/* Interruptions config registers */ +#define BMP580_REG_INT_SOURCE 0x15 +#define BMP580_REG_INT_CONFIG 0x14 + +#define BMP580_CMD_NOOP 0x00 +#define BMP580_CMD_EXTMODE_SEQ_0 0x73 +#define BMP580_CMD_EXTMODE_SEQ_1 0xB4 +#define BMP580_CMD_EXTMODE_SEQ_2 0x69 +#define BMP580_CMD_NVM_OP_SEQ_0 0x5D +#define BMP580_CMD_NVM_READ_SEQ_1 0xA5 +#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 +#define BMP580_CMD_SOFT_RESET 0xB6 + +#define BMP580_INT_STATUS_POR_MASK BIT(4) + +#define BMP580_STATUS_CORE_RDY_MASK BIT(0) +#define BMP580_STATUS_NVM_RDY_MASK BIT(1) +#define BMP580_STATUS_NVM_ERR_MASK BIT(2) +#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3) + +#define BMP580_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_OSR_PRESS_EN BIT(6) +#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_EFF_OSR_VALID_ODR BIT(7) + +#define BMP580_ODR_MASK GENMASK(6, 2) +#define BMP580_MODE_MASK GENMASK(1, 0) +#define BMP580_MODE_SLEEP 0 +#define BMP580_MODE_NORMAL 1 +#define BMP580_MODE_FORCED 2 +#define BMP580_MODE_CONTINOUS 3 +#define BMP580_ODR_DEEPSLEEP_DIS BIT(7) + +#define BMP580_DSP_COMP_MASK GENMASK(1, 0) +#define BMP580_DSP_COMP_DIS 0 +#define BMP580_DSP_TEMP_COMP_EN 1 +/* + * In section 7.27 of datasheet, modes 2 and 3 are technically the same. + * Pressure compensation means also enabling temperature compensation + */ +#define BMP580_DSP_PRESS_COMP_EN 2 +#define BMP580_DSP_PRESS_TEMP_COMP_EN 3 +#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2) +#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3) +#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4) +#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5) +#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6) +#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7) + +#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3) +#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0) +#define BMP580_FILTER_OFF 0 +#define BMP580_FILTER_1X 1 +#define BMP580_FILTER_3X 2 +#define BMP580_FILTER_7X 3 +#define BMP580_FILTER_15X 4 +#define BMP580_FILTER_31X 5 +#define BMP580_FILTER_63X 6 +#define BMP580_FILTER_127X 7 + +#define BMP580_TEMP_SKIPPED 0x7f7f7f +#define BMP580_PRESS_SKIPPED 0x7f7f7f + /* BMP380 specific registers */ #define BMP380_REG_CMD 0x7E #define BMP380_REG_CONFIG 0x1F @@ -184,6 +285,8 @@ #define BMP280_REG_ID 0xD0 #define BMP380_CHIP_ID 0x50 +#define BMP580_CHIP_ID 0x50 +#define BMP580_CHIP_ID_ALT 0x51 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BME280_CHIP_ID 0x60 @@ -353,11 +456,13 @@ extern const struct bmp280_chip_info bmp180_chip_info; extern const struct bmp280_chip_info bmp280_chip_info; extern const struct bmp280_chip_info bme280_chip_info; extern const struct bmp280_chip_info bmp380_chip_info; +extern const struct bmp280_chip_info bmp580_chip_info; /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; extern const struct regmap_config bmp380_regmap_config; +extern const struct regmap_config bmp580_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, -- 2.39.1
