[PATCH 0/4] arm64: dts: meson: fix BPI-M5 and add BPI-M2-PRO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The first patch in this series fixes an SD card (re)boot issue on the
BPI-M5. Susequent patches convert the (fixed) dts into a common dtsi
to support the addition of BPI-M2-PRO which is based upon the BPI-M5
board design.

Christian Hewitt (4):
  arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
  arm64: dts: meson: meson-sm1-bananapi-m5: convert to dtsi
  dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
  arm64: dts: meson: add support for BananaPi M2-Pro

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-sm1-bananapi-m2-pro.dts |  98 ++++
 .../dts/amlogic/meson-sm1-bananapi-m5.dts     | 427 +----------------
 .../boot/dts/amlogic/meson-sm1-bananapi.dtsi  | 435 ++++++++++++++++++
 5 files changed, 536 insertions(+), 426 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi

-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux