Re: [PATCH V1 4/8] pinctrl: qcom: Add IPQ9574 pinctrl driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/26/2023 5:21 AM, Konrad Dybcio wrote:


On 24.01.2023 15:15, devi priya wrote:
Add pinctrl definitions for the TLMM of IPQ9574

Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
---
[...]

+enum ipq9574_functions {
+	msm_mux_atest_char,
+	msm_mux_atest_char0,
+	msm_mux_atest_char1,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_audio_pdm0,
+	msm_mux_audio_pdm1,
+	msm_mux_audio_pri,
+	msm_mux_audio_sec,
+	msm_mux_blsp0_spi,
+	msm_mux_blsp0_uart,
+	msm_mux_blsp1_i2c,
+	msm_mux_blsp1_spi,
+	msm_mux_blsp1_uart,
+	msm_mux_blsp2_i2c,
+	msm_mux_blsp2_spi,
+	msm_mux_blsp2_uart,
+	msm_mux_blsp3_i2c,
+	msm_mux_blsp3_spi,
+	msm_mux_blsp3_uart,
+	msm_mux_blsp4_i2c,
+	msm_mux_blsp4_spi,
+	msm_mux_blsp4_uart,
+	msm_mux_blsp5_i2c,
+	msm_mux_blsp5_uart,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng1,
+	msm_mux_cri_trng2,
+	msm_mux_cri_trng3,
+	msm_mux_cxc0,
+	msm_mux_cxc1,
+	msm_mux_dbg_out,
+	msm_mux_dwc_ddrphy,
+	msm_mux_gcc_plltest,
+	msm_mux_gcc_tlmm,
+	msm_mux_gpio,

+	msm_mux_mac00,
+	msm_mux_mac01,
+	msm_mux_mac10,
+	msm_mux_mac11,
msm_mux_mac?
Okay, will have msm_mux_mac enum instead of the above entries(00, 01, 10, 11)

+	msm_mux_mdc,
+	msm_mux_mdio,
+	msm_mux_pcie0_clk,
+	msm_mux_pcie0_wake,
+	msm_mux_pcie1_clk,
+	msm_mux_pcie1_wake,
+	msm_mux_pcie2_clk,
+	msm_mux_pcie2_wake,
+	msm_mux_pcie3_clk,
+	msm_mux_pcie3_wake,
+	msm_mux_prng_rosc0,
+	msm_mux_prng_rosc1,
+	msm_mux_prng_rosc2,
+	msm_mux_prng_rosc3,

+	msm_mux_pta1_0,
+	msm_mux_pta1_1,
+	msm_mux_pta1_2,
+	msm_mux_pta20,
+	msm_mux_pta21,
msm_mux_pta?
Okay

+	msm_mux_pwm00,
+	msm_mux_pwm01,
+	msm_mux_pwm02,
+	msm_mux_pwm03,
+	msm_mux_pwm04,
+	msm_mux_pwm10,
+	msm_mux_pwm11,
+	msm_mux_pwm12,
+	msm_mux_pwm13,
+	msm_mux_pwm14,
+	msm_mux_pwm20,
+	msm_mux_pwm21,
+	msm_mux_pwm22,
+	msm_mux_pwm23,
+	msm_mux_pwm24,
+	msm_mux_pwm30,
+	msm_mux_pwm31,
+	msm_mux_pwm32,
+	msm_mux_pwm33,
msm_mux_pwm?
Okay

[...]

+
+static const int ipq9574_reserved_gpios[] = {
+	59, -1
+};
We know it's necessary and it's good that you take care
of it, but it would be even nicer if you left a comment
explaining why the rx0/pwm23/qdss_tracedata_a gpio can
not be accessed and what it's used for.

Sure, will add comments in V3
Reserving the GPIO as it is used for controlling the QFPROM LDO regulator by the security component
Konrad
+
+static const struct msm_pinctrl_soc_data ipq9574_pinctrl = {
+	.pins = ipq9574_pins,
+	.npins = ARRAY_SIZE(ipq9574_pins),
+	.functions = ipq9574_functions,
+	.nfunctions = ARRAY_SIZE(ipq9574_functions),
+	.groups = ipq9574_groups,
+	.ngroups = ARRAY_SIZE(ipq9574_groups),
+	.reserved_gpios = ipq9574_reserved_gpios,
+	.ngpios = 65,
+};
+
+static int ipq9574_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &ipq9574_pinctrl);
+}
+
+static const struct of_device_id ipq9574_pinctrl_of_match[] = {
+	{ .compatible = "qcom,ipq9574-tlmm", },
+	{ },
+};
+
+static struct platform_driver ipq9574_pinctrl_driver = {
+	.driver = {
+		.name = "ipq9574-tlmm",
+		.of_match_table = ipq9574_pinctrl_of_match,
+	},
+	.probe = ipq9574_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init ipq9574_pinctrl_init(void)
+{
+	return platform_driver_register(&ipq9574_pinctrl_driver);
+}
+arch_initcall(ipq9574_pinctrl_init);
+
+static void __exit ipq9574_pinctrl_exit(void)
+{
+	platform_driver_unregister(&ipq9574_pinctrl_driver);
+}
+module_exit(ipq9574_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI IPQ9574 TLMM driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, ipq9574_pinctrl_of_match);
Best Regards,
Devi Priya



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux