The I2C Responder translates I2C commands to CFAM or SCOM operations, effectively implementing an FSI master. Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> --- .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml new file mode 100644 index 000000000000..442cecdc57cb --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM I2C Responder virtual FSI master + +maintainers: + - Eddie James <eajames@xxxxxxxxxxxxx> + +description: | + The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM + (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and + writes or SCOM operations, thereby acting as an FSI master. + +properties: + compatible: + enum: + - ibm,i2cr-fsi-master + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2cr@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + }; + }; -- 2.31.1
