The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB. Add the new PCS USB specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- The v2 version of this patch was here: https://lore.kernel.org/all/20230126124651.1362533-5-abel.vesa@xxxxxxxxxx/ Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 + .../phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 31 +++++++++++++++++++ 2 files changed, 32 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index 521ea3ce6b83..14d12d198d87 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -26,6 +26,7 @@ #include "phy-qcom-qmp-pcs-misc-v3.h" #include "phy-qcom-qmp-pcs-usb-v4.h" #include "phy-qcom-qmp-pcs-usb-v5.h" +#include "phy-qcom-qmp-pcs-usb-v6.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h new file mode 100644 index 000000000000..9510e63ba9d8 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_ +#define QCOM_PHY_QMP_PCS_USB_V6_H_ + +/* Only for QMP V6 PHY - USB3 have different offsets than V5 */ +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1 0xc4 +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2 0xc8 +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 +#define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc +#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 +#define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_USB_V6_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc +#define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec + +#define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44 + +#endif -- 2.34.1
