From: Wayne Chang <waynec@xxxxxxxxxx> Add the device-tree binding documentation for Cypress cypd4226 dual Type-C controller. Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> --- V8: removed 'additionalProperties' V7: updated example to use 'typec' for the node name V6: no changes V5: updated subject and updated binding to use 'firmware-name'. V4: no changes V3: fix additionalProperties warning on new schema V2: based on the review comments. Fix some addressed issues on .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml new file mode 100644 index 000000000000..7ab23d8fdb20 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress cypd4226 Type-C Controller + +maintainers: + - Wayne Chang <waynec@xxxxxxxxxx> + +description: + The Cypress cypd4226 is a dual Type-C controller that is controlled + via an I2C interface. + +properties: + compatible: + const: cypress,cypd4226 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 0x08 + + interrupts: + items: + - description: cypd4226 host interrupt + + firmware-name: + enum: + - nvidia,gpu + - nvidia,jetson-agx-xavier + description: | + The name of the CCGx firmware built for product series. + should be set one of following: + - "nvidia,gpu" for the NVIDIA RTX product series + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series + +patternProperties: + '^connector@[0-1]+$': + $ref: /schemas/connector/usb-connector.yaml# + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <2>; + + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + #address-cells = <1>; + #size-cells = <0>; + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "dual"; + port { + endpoint { + remote-endpoint = <&usb_role_switch0>; + }; + }; + }; + }; + }; -- 2.25.1
