mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- sd_emmc_b: sd@5000 {
+ sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
--
2.39.1
