On Mon, 28 Nov 2022, Pali wrote:
Date: Mon, 28 Nov 2022 19:52:56
From: Pali <pali@xxxxxxx>
To: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
Subject: Re: [PATCH] arm64: dts: marvell: add DTS for GL.iNet GL-MV1000
Hello! Thanks for the patch. I have a few comments.
Ideally, for kernel patches, please CC my kernel address pali@xxxxxxxxxx
so my email filter correctly put PATCH into correct folder, so I will
see it in review queue :-)
Thanks again, sorry for the inconvenience.
About partition generally, I would suggest to completely drop all
"read-only" attributes (except factory). I think that "read-only" is
useful for some calibration data which should never be erased or
updated. So factory with MAC address should be marked as read-only. But
on the other hand, firmware, dtb and system rootfs is something
upgradable - therefore should be read/write.
Ok, thanks. I removed all the read-only markers except on the factory partitions. The u-boot-env partition will be marked read-only by the kernel itself due to it not ending at an erase/write boundary block.
Still, updating environment on this device maybe useful when e.g.: installing a general purpose distribution as opposed to OpenWrt in the eMMC.
Ad first partition@0: I would suggest to use label "firmware" as this
name is used on all A3720 devices because at offset 0 is not u-boot, but
A3720 firmware (TIM). And this partition contains concatenation of TIM,
WTMI, ARM trusted firmware and U-Boot. Hence generic firmware name is
better.
ACK, thanks a lot.
Ad partition partition@100000: I would suggest to name it just "dtb".
Device Tree Blob is system independent and hence can be used by any
operating system or program (U-Boot, Linux, BSD, etc...).
Sure.
Anyway, what is stored on "gl-firmware" partition and what on
"gl-firmware-jffs2" partition? JFFS2 is file systems, mostly used for
the system as root file system. If this is truth than better label could
be "rootfs"?
Well - here "firmware" is meant in OpenWrt "conventions" in a sense: so:
- gl-firmware: consists of an u-boot legacy uImage (kernel+squashfs root filesystem)
Squashfs is read-only of course, so OpenWrt uses overlayfs to store changes.
- gl-firmware-jffs2: is used as an overlay to store changes, and contains a JFFS2 filesystem (which is OK, since this is stored in NOR flash).
So to recap:
- openwrt boots from eMMC and is stored there
- here we are definiting the partitions for the NOR flash which contains a copy of the "stock" gl.iNet firmware (actually a modified copy of OpenWRt, with features such as automatic firmware updates).
I prepended them with "gl-" to signal the fact they're stock from gl.iNet, but don't know how to better name them.
Recently I introduced updated DTS file for old Turris 1.x routers where
I tried to use more descriptive partitions labels and also put comments:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/boot/dts/turris1x.dts
I had a look at it. Thanks!
On Tuesday 22 November 2022 07:30:17 Enrico Mioso wrote:
The GL-MV1000 (Brume) is a small form-factor gateway router.
It is based on the Marvell Armada 88F3720 SOC (1GHz), has 3 gigabit ethernet ports, 1 GB RAM, 16M SPI flash, 8GB eMMC and an uSD slot, as well as an USB 2.0 type A and an USB 3.0 type C port.
Signed-off-by: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
CC: Pali <pali@xxxxxxx>
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../dts/marvell/armada-3720-gl-mv1000.dts | 248 ++++++++++++++++++
2 files changed, 249 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 058237681fe5..79ac09b58a89 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644
index 000000000000..72d7267ccd08
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "GL.iNet GL-MV1000";
+ compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
+
+ switch {
+ label = "switch";
+ linux,code = <BTN_0>;
+ gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ vpn {
+ label = "green:vpn";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0xf0000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "u-boot-env";
+ reg = <0xf0000 0x8000>;
+ read-only;
+ };
+
+ factory: partition@f8000 {
+ label = "factory";
+ reg = <0xf8000 0x8000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "gl-firmware-dtb";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "gl-firmware";
+ reg = <0x110000 0xef0000>;
+ read-only;
+ };
+
+ partition@ef0000 {
+ label = "gl-firmware-jffs2";
+ reg = <0xef0000 0x110000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ no-1-8-v;
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mdio {
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <ð0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+ð0 {
+ nvmem-cells = <&macaddr_factory_0>;
+ nvmem-cell-names = "mac-address";
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_factory_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
--
2.38.1