[RFT PATCH v3 5/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pin configuration fow WCD9340 is the same in all users, so move it to
common file to reduce the code duplication (which still allows further
customizations per board).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

---

Changes since v2:
1. None

Changes since v1:
1. Add Rb tag.
2. Split from previous patchset.
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts        | 11 -----------
 arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi      | 15 +++++++++++++++
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi  | 11 -----------
 .../arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 10 ----------
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts     | 11 -----------
 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts  | 11 -----------
 6 files changed, 15 insertions(+), 54 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 118cc50ce49b..c7a12257ac75 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -973,15 +973,6 @@ sdc2_card_det_n: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart3 {
@@ -1087,8 +1078,6 @@ &venus {
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index 5bcce7d0d709..33718cb95c83 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -32,6 +32,10 @@ wcd9340: codec@1,0 {
 			#clock-cells = <0>;
 			clock-frequency = <9600000>;
 			clock-output-names = "mclk";
+
+			pinctrl-0 = <&wcd_intr_default>;
+			pinctrl-names = "default";
+
 			qcom,micbias1-microvolt = <1800000>;
 			qcom,micbias2-microvolt = <1800000>;
 			qcom,micbias3-microvolt = <1800000>;
@@ -67,3 +71,14 @@ swm: swm@c85 {
 		};
 	};
 };
+
+&tlmm {
+	wcd_intr_default: wcd-intr-default-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index a472c716f966..57f1c5925cb0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -466,15 +466,6 @@ sdc2_card_det_n: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -543,8 +534,6 @@ &venus {
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index ea2a1a9fb3ff..468867363f18 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -616,14 +616,6 @@ sde_dsi_suspend: sde-dsi-suspend-state {
 		drive-strength = <2>;
 		bias-pull-down;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -700,8 +692,6 @@ &venus {
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 6d253fbe0267..a461cb7f6bd2 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -628,15 +628,6 @@ i2c11_hid_active: i2c11-hid-active-state {
 		drive-strength = <2>;
 	};
 
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
-
 	lid_pin_active: lid-pin-state {
 		pins = "gpio124";
 		function = "gpio";
@@ -747,8 +738,6 @@ &venus {
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 6758b0698acc..d4ae2788bada 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -552,15 +552,6 @@ pen_rst_l: pen-rst-l-state {
 		 */
 		output-high;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -656,8 +647,6 @@ &venus {
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
 	clock-names = "extclk";
 	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux