Re: [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/01/2023 15:04, Abel Vesa wrote:
> Add the SM8550 platform to the binding.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
> 
> The v3 of this patchset is:
> https://lore.kernel.org/all/20230119112453.3393911-1-abel.vesa@xxxxxxxxxx/
> 
> Changes since v3:
>  * renamed noc_aggr to noc_aggr_4, as found in the driver
> 
> Changes since v2:
>  * dropped the pipe from clock-names
>  * removed the pcie instance number from aggre clock-names comment
>  * renamed aggre clock-names to noc_aggr
>  * dropped the _pcie infix from cnoc_pcie_sf_axi
>  * renamed pcie_1_link_down_reset to simply link_down
>  * added enable-gpios back, since pcie1 node will use it
> 
> Changes since v1:
>  * Switched to single compatible for both PCIes (qcom,pcie-sm8550)
>  * dropped enable-gpios property
>  * dropped interconnects related properties, the power-domains
>  * properties
>    and resets related properties the sm8550 specific allOf:if:then
>  * dropped pipe_mux, phy_pipe and ref clocks from the sm8550 specific
>    allOf:if:then clock-names array and decreased the minItems and
>    maxItems for clocks property accordingly
>  * added "minItems: 1" to interconnects, since sm8550 pcie uses just
>  * one,
>    same for interconnect-names
> 
> 
>  .../devicetree/bindings/pci/qcom,pcie.yaml    | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index a5859bb3dc28..58f926666332 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -34,6 +34,7 @@ properties:
>        - qcom,pcie-sm8250
>        - qcom,pcie-sm8450-pcie0
>        - qcom,pcie-sm8450-pcie1
> +      - qcom,pcie-sm8550
>        - qcom,pcie-ipq6018
>  
>    reg:
> @@ -65,9 +66,11 @@ properties:
>    dma-coherent: true
>  
>    interconnects:
> +    minItems: 1
>      maxItems: 2
>  

I don't see my concerns from v3 answered.

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux