Le samedi 21 janvier 2023 à 17:24 +0100, Christophe Branchereau a
écrit :
> Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
> 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
> interface.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
Works fine.
Tested-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
I need someone else to review this patch before I can apply it. Sam? :)
Cheers,
-Paul
> ---
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-auo-a030jtn01.c | 308
> ++++++++++++++++++++
> 3 files changed, 317 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-auo-a030jtn01.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig
> b/drivers/gpu/drm/panel/Kconfig
> index 737edcdf9eef..23cf0f4ba2e6 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -8,6 +8,14 @@ config DRM_PANEL
> menu "Display Panels"
> depends on DRM && DRM_PANEL
>
> +config DRM_PANEL_AUO_A030JTN01
> + tristate "AUO A030JTN01"
> + depends on SPI
> + select REGMAP_SPI
> + help
> + Say Y here to enable support for the AUO A030JTN01 320x480
> 3.0" panel
> + as found in the YLM RS-97 handheld gaming console.
> +
> config DRM_PANEL_ABT_Y030XX067A
> tristate "ABT Y030XX067A 320x480 LCD panel"
> depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile
> b/drivers/gpu/drm/panel/Makefile
> index f8f9d9f6a307..af88658abcab 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
> obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o
> obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-
> tm5p5-n35596.o
> diff --git a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> new file mode 100644
> index 000000000000..3c976a98de6a
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * AU Optronics A030JTN01.0 TFT LCD panel driver
> + *
> + * Copyright (C) 2023, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> + * Copyright (C) 2023, Christophe Branchereau
> <cbranchereau@xxxxxxxxx>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define REG05 0x05
> +#define REG06 0x06
> +#define REG07 0x07
> +
> +#define REG05_STDBY BIT(0)
> +#define REG06_VBLK GENMASK(4, 0)
> +#define REG07_HBLK GENMASK(7, 0)
> +
> +
> +struct a030jtn01_info {
> + const struct drm_display_mode *display_modes;
> + unsigned int num_modes;
> + u16 width_mm, height_mm;
> + u32 bus_format, bus_flags;
> +};
> +
> +struct a030jtn01 {
> + struct drm_panel panel;
> + struct spi_device *spi;
> + struct regmap *map;
> +
> + const struct a030jtn01_info *panel_info;
> +
> + struct regulator *supply;
> + struct gpio_desc *reset_gpio;
> +};
> +
> +static inline struct a030jtn01 *to_a030jtn01(struct drm_panel
> *panel)
> +{
> + return container_of(panel, struct a030jtn01, panel);
> +}
> +
> +static int a030jtn01_prepare(struct drm_panel *panel)
> +{
> + struct a030jtn01 *priv = to_a030jtn01(panel);
> + struct device *dev = &priv->spi->dev;
> + unsigned int dummy;
> + int err;
> +
> + err = regulator_enable(priv->supply);
> + if (err) {
> + dev_err(dev, "Failed to enable power supply: %d\n",
> err);
> + return err;
> + }
> +
> + usleep_range(1000, 8000);
> +
> + /* Reset the chip */
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + usleep_range(100, 8000);
> + gpiod_set_value_cansleep(priv->reset_gpio, 0);
> + usleep_range(2000, 8000);
> +
> + /*
> + * No idea why, but a register read (doesn't matter which) is
> needed to
> + * properly initialize the chip after a reset; otherwise, the
> colors
> + * will be wrong. It doesn't seem to be timing-related as a
> msleep(200)
> + * doesn't fix it.
> + */
> + err = regmap_read(priv->map, REG05, &dummy);
> + if (err)
> + goto err_disable_regulator;
> +
> + /* Use (24 + 6) == 0x1e as the vertical back porch */
> + err = regmap_write(priv->map, REG06, FIELD_PREP(REG06_VBLK,
> 0x1e));
> + if (err)
> + goto err_disable_regulator;
> +
> + /* Use (42 + 30) * 3 == 0xd8 as the horizontal back porch */
> + err = regmap_write(priv->map, REG07, FIELD_PREP(REG07_HBLK,
> 0xd8));
> + if (err)
> + goto err_disable_regulator;
> +
> + return 0;
> +
> +err_disable_regulator:
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + regulator_disable(priv->supply);
> + return err;
> +}
> +
> +static int a030jtn01_unprepare(struct drm_panel *panel)
> +{
> + struct a030jtn01 *priv = to_a030jtn01(panel);
> +
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + regulator_disable(priv->supply);
> +
> + return 0;
> +}
> +
> +static int a030jtn01_enable(struct drm_panel *panel)
> +{
> + struct a030jtn01 *priv = to_a030jtn01(panel);
> + int ret;
> +
> + ret = regmap_set_bits(priv->map, REG05, REG05_STDBY);
> + if (ret)
> + return ret;
> +
> + /* Wait for the picture to be stable */
> + if (panel->backlight)
> + msleep(100);
> +
> + return 0;
> +}
> +
> +static int a030jtn01_disable(struct drm_panel *panel)
> +{
> + struct a030jtn01 *priv = to_a030jtn01(panel);
> +
> + return regmap_clear_bits(priv->map, REG05, REG05_STDBY);
> +}
> +
> +static int a030jtn01_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct a030jtn01 *priv = to_a030jtn01(panel);
> + const struct a030jtn01_info *panel_info = priv->panel_info;
> + struct drm_display_mode *mode;
> + unsigned int i;
> +
> + for (i = 0; i < panel_info->num_modes; i++) {
> + mode = drm_mode_duplicate(connector->dev,
> + &panel_info-
> >display_modes[i]);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER;
> + if (panel_info->num_modes == 1)
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> +
> + drm_mode_probed_add(connector, mode);
> + }
> +
> + connector->display_info.bpc = 8;
> + connector->display_info.width_mm = panel_info->width_mm;
> + connector->display_info.height_mm = panel_info->height_mm;
> +
> + drm_display_info_set_bus_formats(&connector->display_info,
> + &panel_info->bus_format, 1);
> + connector->display_info.bus_flags = panel_info->bus_flags;
> +
> + return panel_info->num_modes;
> +}
> +
> +static const struct drm_panel_funcs a030jtn01_funcs = {
> + .prepare = a030jtn01_prepare,
> + .unprepare = a030jtn01_unprepare,
> + .enable = a030jtn01_enable,
> + .disable = a030jtn01_disable,
> + .get_modes = a030jtn01_get_modes,
> +};
> +
> +static bool a030jtn01_has_reg(struct device *dev, unsigned int reg)
> +{
> + static const u32 a030jtn01_regs_mask = 0x001823f1fb;
> +
> + return a030jtn01_regs_mask & BIT(reg);
> +};
> +
> +static const struct regmap_config a030jtn01_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .read_flag_mask = 0x40,
> + .max_register = 0x1c,
> + .readable_reg = a030jtn01_has_reg,
> + .writeable_reg = a030jtn01_has_reg,
> +};
> +
> +static int a030jtn01_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct a030jtn01 *priv;
> + int err;
> +
> + spi->mode |= SPI_MODE_3 | SPI_3WIRE;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->spi = spi;
> + spi_set_drvdata(spi, priv);
> +
> + priv->map = devm_regmap_init_spi(spi,
> &a030jtn01_regmap_config);
> + if (IS_ERR(priv->map))
> + return dev_err_probe(dev, PTR_ERR(priv->map), "Unable
> to init regmap");
> +
> + priv->panel_info = spi_get_device_match_data(spi);
> + if (!priv->panel_info)
> + return -EINVAL;
> +
> + priv->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(priv->supply))
> + return dev_err_probe(dev, PTR_ERR(priv->supply),
> "Failed to get power supply");
> +
> + priv->reset_gpio = devm_gpiod_get(dev, "reset",
> GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
> "Failed to get reset GPIO");
> +
> + drm_panel_init(&priv->panel, dev, &a030jtn01_funcs,
> + DRM_MODE_CONNECTOR_DPI);
> +
> + err = drm_panel_of_backlight(&priv->panel);
> + if (err)
> + return err;
> +
> + drm_panel_add(&priv->panel);
> +
> + return 0;
> +}
> +
> +static void a030jtn01_remove(struct spi_device *spi)
> +{
> + struct a030jtn01 *priv = spi_get_drvdata(spi);
> +
> + drm_panel_remove(&priv->panel);
> + drm_panel_disable(&priv->panel);
> + drm_panel_unprepare(&priv->panel);
> +}
> +
> +static const struct drm_display_mode a030jtn01_modes[] = {
> + { /* 60 Hz */
> + .clock = 14400,
> + .hdisplay = 320,
> + .hsync_start = 320 + 8,
> + .hsync_end = 320 + 8 + 42,
> + .htotal = 320 + 8 + 42 + 30,
> + .vdisplay = 480,
> + .vsync_start = 480 + 90,
> + .vsync_end = 480 + 90 + 24,
> + .vtotal = 480 + 90 + 24 + 6,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + },
> + { /* 50 Hz */
> + .clock = 12000,
> + .hdisplay = 320,
> + .hsync_start = 320 + 8,
> + .hsync_end = 320 + 8 + 42,
> + .htotal = 320 + 8 + 42 + 30,
> + .vdisplay = 480,
> + .vsync_start = 480 + 90,
> + .vsync_end = 480 + 90 + 24,
> + .vtotal = 480 + 90 + 24 + 6,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + },
> +};
> +
> +static const struct a030jtn01_info a030jtn01_info = {
> + .display_modes = a030jtn01_modes,
> + .num_modes = ARRAY_SIZE(a030jtn01_modes),
> + .width_mm = 70,
> + .height_mm = 51,
> + .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
> + .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +};
> +
> +static const struct spi_device_id a030jtn01_id[] = {
> + { "a030jtn01", (kernel_ulong_t) &a030jtn01_info },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(spi, a030jtn01_id);
> +
> +static const struct of_device_id a030jtn01_of_match[] = {
> + { .compatible = "auo,a030jtn01" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, a030jtn01_of_match);
> +
> +static struct spi_driver a030jtn01_driver = {
> + .driver = {
> + .name = "auo-a030jtn01",
> + .of_match_table = a030jtn01_of_match,
> + },
> + .id_table = a030jtn01_id,
> + .probe = a030jtn01_probe,
> + .remove = a030jtn01_remove,
> +};
> +module_spi_driver(a030jtn01_driver);
> +
> +MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Christophe Branchereau <cbranchereau@xxxxxxxxx>");
> +MODULE_LICENSE("GPL");
