The VIA Lab VL817 is a USB 3.1 Gen 1 hub and USB 2.0 hub
controller that features 4 downstream ports and 1 otg, with
an internal 5V regulator and has external reset pin.
Add a device tree binding for its USB protocol part.
The internal LDO is not covered by this and can just be modelled
as a fixed regulator.
Add combo of USB 2.0 and USB 3.0 root hub using peer-hub.
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
v3 - address review coments - Krzysztof
dropped dr_mode
v2 - fix the compatible string and fix the $id
- update the commit message.
- update the example for use peer-hub node because it
combo of USB 2.0 and USB 3.0 hub.
- rename the yaml file from vialab,vl817q7.yaml to vialab,vl817.yaml
as q7 suffix is ued for USB 3.1 and q5 suffix is used for USB 2.0.
---
.../devicetree/bindings/usb/vialab,vl817.yaml | 71 +++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/vialab,vl817.yaml
diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
new file mode 100644
index 000000000000..23a13e1d5c7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/vialab,vl817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Via labs VL817 USB 3.1 hub controller
+
+maintainers:
+ - Anand Moon <linux.amoon@xxxxxxxxx>
+
+allOf:
+ - $ref: usb-device.yaml#
+
+properties:
+ compatible:
+ enum:
+ - usb2109,2817
+ - usb2109,817
+
+ reg: true
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ GPIO controlling the RESET# pin.
+
+ vdd-supply:
+ description:
+ phandle to the regulator that provides power to the hub.
+
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the peer hub on the controller.
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vdd-supply
+ - peer-hub
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb2109,2817";
+ reg = <1>;
+ vdd-supply = <&vcc_5v>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.1 hub on port 4 */
+ hub_3_0: hub@2 {
+ compatible = "usb2109,817";
+ reg = <2>;
+ vdd-supply = <&vcc_5v>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
--
2.38.1
