Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 19 Jan 2023 22:26:31 +0100
Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> wrote:

> As discussed in [1] it is more convenient to use a generic adc-chan node
> name for ADC channels while storing a friendly - board-specific instead
> of PMIC-specific - name in the label, if/when desired to overwrite the
> channel description already contained (but previously unused) in the
> driver [2].
> 
> Replace the .* name pattern with the adc-chan literal, but leave the
> label property optional for bindings to choose to fall back a channel
> label hardcoded in the driver [2] instead.
> 
> [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@xxxxxxxxxxxxxx/T/#u
> [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@xxxxxxxxxxxxxx/
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Other than the use in the tm5 thermal example that Rob's bot found, this looks
good to me.  I think ideal would be to fix that in a precursor patch then
do this one.

Note that the existing two patches should be in the other order
1. Update the dtsi
2. Tighten the bounds to check they are right.

Doesn't matter much though as the two patches will probably go through
different trees.

Thanks,

Jonathan

> ---
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml         | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index bd6e0d6f6e0c..9b1a60fe7599 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -54,7 +54,7 @@ required:
>    - '#io-channel-cells'
>  
>  patternProperties:
> -  "^.*@[0-9a-f]+$":
> +  "^adc-chan@[0-9a-f]+$":
>      type: object
>      additionalProperties: false
>      description: |
> @@ -148,7 +148,7 @@ allOf:
>  
>      then:
>        patternProperties:
> -        "^.*@[0-9a-f]+$":
> +        "^adc-chan@[0-9a-f]+$":
>            properties:
>              qcom,decimation:
>                enum: [ 512, 1024, 2048, 4096 ]
> @@ -171,7 +171,7 @@ allOf:
>  
>      then:
>        patternProperties:
> -        "^.*@[0-9a-f]+$":
> +        "^adc-chan@[0-9a-f]+$":
>            properties:
>              qcom,decimation:
>                enum: [ 256, 512, 1024 ]
> @@ -194,7 +194,7 @@ allOf:
>  
>      then:
>        patternProperties:
> -        "^.*@[0-9a-f]+$":
> +        "^adc-chan@[0-9a-f]+$":
>            properties:
>              qcom,decimation:
>                enum: [ 250, 420, 840 ]
> @@ -217,7 +217,7 @@ allOf:
>  
>      then:
>        patternProperties:
> -        "^.*@[0-9a-f]+$":
> +        "^adc-chan@[0-9a-f]+$":
>            properties:
>              qcom,decimation:
>                enum: [ 85, 340, 1360 ]
> @@ -292,16 +292,18 @@ examples:
>              #io-channel-cells = <1>;
>  
>              /* Other properties are omitted */
> -            xo-therm@44 {
> +            adc-chan@44 {
>                  reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
>                  qcom,ratiometric;
>                  qcom,hw-settle-time = <200>;
> +                label = "xo_therm";
>              };
>  
> -            conn-therm@47 {
> +            adc-chan@47 {
>                  reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
>                  qcom,ratiometric;
>                  qcom,hw-settle-time = <200>;
> +                label = "conn_therm";
>              };
>          };
>      };




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux