[PATCH] ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DT schema expects nodes ending with "pins:

  qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed:
    'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Warning visible after:
https://lore.kernel.org/r/20230120165103.1278852-1-robh@xxxxxxxxxx
---
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 7a4c59e04af6..8e4b61e4d4b1 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -435,15 +435,13 @@ &pm8058_led133 {
 
 &pm8058_mpps {
 	dragon_cm3605_mpps: cm3605-mpps-state {
-		mpp5 {
-			pins = "mpp5";
-			function = "analog";
-			input-enable;
-			bias-high-impedance;
-			/* Let's use channel 5 */
-			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-			power-source = <PM8058_GPIO_S3>;
-		};
+		pins = "mpp5";
+		function = "analog";
+		input-enable;
+		bias-high-impedance;
+		/* Let's use channel 5 */
+		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		power-source = <PM8058_GPIO_S3>;
 	};
 };
 
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux