VPH_PWR is routed to battery, so it is not configurable. However few
devices, e.g. WM5110 expect speaker power supplies, thus provide the
regulator for full hardware description. Audio amplifier also accepts
that power supply.
Keep ordering the nodes by renaming existing IRDA regulator.
This fixes dtbs_check warnings:
exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDL-supply' is a required property
exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDR-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6f701297a665..3785a6580bdf 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -99,11 +99,18 @@ max98504: amplifier@31 {
DIOVDD-supply = <&ldo3_reg>;
DVDD-supply = <&ldo3_reg>;
- /* PVDD-supply to VPH_PWR */
+ PVDD-supply = <&vph_pwr_regulator>;
};
};
- irda_regulator: irda-regulator {
+ vph_pwr_regulator: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "VPH_PWR";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ };
+
+ irda_regulator: regulator-irda {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
@@ -1298,6 +1305,8 @@ wm5110: audio-codec@0 {
CPVDD-supply = <&ldo18_reg>;
DBVDD2-supply = <&ldo18_reg>;
DBVDD3-supply = <&ldo18_reg>;
+ SPKVDDL-supply = <&vph_pwr_regulator>;
+ SPKVDDR-supply = <&vph_pwr_regulator>;
controller-data {
samsung,spi-feedback-delay = <0>;
--
2.34.1
