Each Cluster of the Coolidge SoC includes an Advanced Programmable
Interrupt Controller (APIC) and Generic Interrupt Controller (GIC).
The APIC GIC acts as an intermediary interrupt controller, muxing/routing
incoming interrupts to cores in the cluster.
The 139 possible input interrupt lines are organized as follow:
- 128 from the mailbox controller (one it per mailboxes)
- 1 from the NoC router
- 5 from IOMMUs
- 1 from L2 cache DMA job FIFO
- 1 from cluster watchdog
- 2 for SECC, DECC
- 1 from Data NoC
The 72 possible output interrupt line:
- 68 : 4 interrupts per cores (17 cores)
- 1 for L2 cache controller
- 3 extra that are for padding
Co-developed-by: Clement Leger <clement@xxxxxxxxxxxxxxxx>
Signed-off-by: Clement Leger <clement@xxxxxxxxxxxxxxxx>
Co-developed-by: Julian Vetter <jvetter@xxxxxxxxx>
Signed-off-by: Julian Vetter <jvetter@xxxxxxxxx>
Co-developed-by: Vincent Chardon <vincent.chardon@xxxxxxxxxxxxxxxx>
Signed-off-by: Vincent Chardon <vincent.chardon@xxxxxxxxxxxxxxxx>
Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxx>
---
Notes:
V1 -> V2:
- removed irq-kvx-itgen driver (moved in its own patch)
- removed irq-kvx-apic-mailbox driver (moved in its own patch)
- removed irq-kvx-core-intc driver (moved in its own patch)
- removed print on probe success
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-kvx-apic-gic.c | 356 +++++++++++++++++++++++++++++
3 files changed, 363 insertions(+)
create mode 100644 drivers/irqchip/irq-kvx-apic-gic.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 7ef9f5e696d3..2433e4ba0759 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -334,6 +334,12 @@ config MIPS_GIC
select IRQ_DOMAIN_HIERARCHY
select MIPS_CM
+config KVX_APIC_GIC
+ bool
+ depends on KVX
+ select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
+
config INGENIC_IRQ
bool
depends on MACH_INGENIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 87b49a10962c..8ac1dd880420 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
+obj-$(CONFIG_KVX_APIC_GIC) += irq-kvx-apic-gic.o
obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o irq-mtk-cirq.o
obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
diff --git a/drivers/irqchip/irq-kvx-apic-gic.c b/drivers/irqchip/irq-kvx-apic-gic.c
new file mode 100644
index 000000000000..cc234a075473
--- /dev/null
+++ b/drivers/irqchip/irq-kvx-apic-gic.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017 - 2022 Kalray Inc.
+ * Author(s): Clement Leger
+ * Julian Vetter
+ */
+
+#define pr_fmt(fmt) "kvx_apic_gic: " fmt
+
+#include <linux/of_address.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/spinlock.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/of.h>
+
+/* APIC is organized in 18 groups of 4 output lines
+ * However, the two upper lines are for Secure RM and DMA engine
+ * Thus, we do not have to use them
+ */
+#define KVX_GIC_PER_CPU_IT_COUNT 4
+#define KVX_GIC_INPUT_IT_COUNT 0x9D
+#define KVX_GIC_OUTPUT_IT_COUNT 0x10
+
+/* GIC enable register definitions */
+#define KVX_GIC_ENABLE_OFFSET 0x0
+#define KVX_GIC_ENABLE_ELEM_SIZE 0x1
+#define KVX_GIC_ELEM_SIZE 0x400
+
+/* GIC status lac register definitions */
+#define KVX_GIC_STATUS_LAC_OFFSET 0x120
+#define KVX_GIC_STATUS_LAC_ELEM_SIZE 0x8
+#define KVX_GIC_STATUS_LAC_ARRAY_SIZE 0x3
+
+/**
+ * For each CPU, there is 4 output lines coming from the apic GIC.
+ * We only use 1 line and this structure represent this line.
+ * @base Output line base address
+ * @cpu CPU associated to this line
+ */
+struct gic_out_irq_line {
+ void __iomem *base;
+ unsigned int cpu;
+};
+
+/**
+ * Input irq line.
+ * This structure is used to store the status of the input line and the
+ * associated output line.
+ * @enabled Boolean for line status
+ * @cpu CPU currently receiving this interrupt
+ * @it_num Interrupt number
+ */
+struct gic_in_irq_line {
+ bool enabled;
+ struct gic_out_irq_line *out_line;
+ unsigned int it_num;
+};
+
+/**
+ * struct kvx_apic_gic - kvx apic gic
+ * @base: Base address of the controller
+ * @domain Domain for this controller
+ * @input_nr_irqs: maximum number of supported input interrupts
+ * @cpus: Per cpu interrupt configuration
+ * @output_irq: Array of output irq lines
+ * @input_irq: Array of input irq lines
+ */
+struct kvx_apic_gic {
+ raw_spinlock_t lock;
+ void __iomem *base;
+ struct irq_domain *domain;
+ uint32_t input_nr_irqs;
+ /* For each cpu, there is an output IT line */
+ struct gic_out_irq_line output_irq[KVX_GIC_OUTPUT_IT_COUNT];
+ /* Input interrupt status */
+ struct gic_in_irq_line input_irq[KVX_GIC_INPUT_IT_COUNT];
+};
+
+static int gic_parent_irq;
+
+/**
+ * Enable/Disable an output irq line
+ * This function is used by both mask/unmask to disable/enable the line.
+ */
+static void irq_line_set_enable(struct gic_out_irq_line *irq_line,
+ struct gic_in_irq_line *in_irq_line,
+ int enable)
+{
+ void __iomem *enable_line_addr = irq_line->base +
+ KVX_GIC_ENABLE_OFFSET +
+ in_irq_line->it_num * KVX_GIC_ENABLE_ELEM_SIZE;
+
+ writeb((uint8_t) enable ? 1 : 0, enable_line_addr);
+ in_irq_line->enabled = enable;
+}
+
+static void kvx_apic_gic_set_line(struct irq_data *data, int enable)
+{
+ struct kvx_apic_gic *gic = irq_data_get_irq_chip_data(data);
+ unsigned int in_irq = irqd_to_hwirq(data);
+ struct gic_in_irq_line *in_line = &gic->input_irq[in_irq];
+ struct gic_out_irq_line *out_line = in_line->out_line;
+
+ raw_spin_lock(&gic->lock);
+ /* Set line enable on currently assigned cpu */
+ irq_line_set_enable(out_line, in_line, enable);
+ raw_spin_unlock(&gic->lock);
+}
+
+static void kvx_apic_gic_mask(struct irq_data *data)
+{
+ kvx_apic_gic_set_line(data, 0);
+}
+
+static void kvx_apic_gic_unmask(struct irq_data *data)
+{
+ kvx_apic_gic_set_line(data, 1);
+}
+
+#ifdef CONFIG_SMP
+
+static int kvx_apic_gic_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask,
+ bool force)
+{
+ struct kvx_apic_gic *gic = irq_data_get_irq_chip_data(d);
+ unsigned int new_cpu;
+ unsigned int hw_irq = irqd_to_hwirq(d);
+ struct gic_in_irq_line *input_line = &gic->input_irq[hw_irq];
+ struct gic_out_irq_line *new_out_line;
+
+ /* We assume there is only one cpu in the mask */
+ new_cpu = cpumask_first(cpumask);
+ new_out_line = &gic->output_irq[new_cpu];
+
+ raw_spin_lock(&gic->lock);
+
+ /* Nothing to do, line is the same */
+ if (new_out_line == input_line->out_line)
+ goto out;
+
+ /* If old line was enabled, enable the new one before disabling
+ * the old one
+ */
+ if (input_line->enabled)
+ irq_line_set_enable(new_out_line, input_line, 1);
+
+ /* Disable it on old line */
+ irq_line_set_enable(input_line->out_line, input_line, 0);
+
+ /* Assign new output line to input IRQ */
+ input_line->out_line = new_out_line;
+
+out:
+ raw_spin_unlock(&gic->lock);
+
+ irq_data_update_effective_affinity(d, cpumask_of(new_cpu));
+
+ return IRQ_SET_MASK_OK;
+}
+#endif
+
+static struct irq_chip kvx_apic_gic_chip = {
+ .name = "kvx apic gic",
+ .irq_mask = kvx_apic_gic_mask,
+ .irq_unmask = kvx_apic_gic_unmask,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = kvx_apic_gic_set_affinity,
+#endif
+};
+
+static int kvx_apic_gic_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *args)
+{
+ int i;
+ struct irq_fwspec *fwspec = args;
+ int hwirq = fwspec->param[0];
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_info(domain, virq + i, hwirq + i,
+ &kvx_apic_gic_chip,
+ domain->host_data, handle_simple_irq,
+ NULL, NULL);
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops kvx_apic_gic_domain_ops = {
+ .alloc = kvx_apic_gic_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static void irq_line_get_status_lac(struct gic_out_irq_line *out_irq_line,
+ uint64_t status[KVX_GIC_STATUS_LAC_ARRAY_SIZE])
+{
+ int i;
+
+ for (i = 0; i < KVX_GIC_STATUS_LAC_ARRAY_SIZE; i++) {
+ status[i] = readq(out_irq_line->base +
+ KVX_GIC_STATUS_LAC_OFFSET +
+ i * KVX_GIC_STATUS_LAC_ELEM_SIZE);
+ }
+}
+
+static void kvx_apic_gic_handle_irq(struct irq_desc *desc)
+{
+ struct kvx_apic_gic *gic_data = irq_desc_get_handler_data(desc);
+ struct gic_out_irq_line *out_line;
+ uint64_t status[KVX_GIC_STATUS_LAC_ARRAY_SIZE];
+ unsigned long irqn, cascade_irq;
+ unsigned long cpu = smp_processor_id();
+
+ out_line = &gic_data->output_irq[cpu];
+
+ irq_line_get_status_lac(out_line, status);
+
+ for_each_set_bit(irqn, (unsigned long *) status,
+ KVX_GIC_STATUS_LAC_ARRAY_SIZE * BITS_PER_LONG) {
+
+ cascade_irq = irq_find_mapping(gic_data->domain, irqn);
+
+ generic_handle_irq(cascade_irq);
+ }
+}
+
+static void __init apic_gic_init(struct kvx_apic_gic *gic)
+{
+ unsigned int cpu, line;
+ struct gic_in_irq_line *input_irq_line;
+ struct gic_out_irq_line *output_irq_line;
+ uint64_t status[KVX_GIC_STATUS_LAC_ARRAY_SIZE];
+
+ /* Initialize all input lines (device -> )*/
+ for (line = 0; line < KVX_GIC_INPUT_IT_COUNT; line++) {
+ input_irq_line = &gic->input_irq[line];
+ input_irq_line->enabled = false;
+ /* All input lines map on output 0 */
+ input_irq_line->out_line = &gic->output_irq[0];
+ input_irq_line->it_num = line;
+ }
+
+ /* Clear all output lines (-> cpus) */
+ for (cpu = 0; cpu < KVX_GIC_OUTPUT_IT_COUNT; cpu++) {
+ output_irq_line = &gic->output_irq[cpu];
+ output_irq_line->cpu = cpu;
+ output_irq_line->base = gic->base +
+ cpu * (KVX_GIC_ELEM_SIZE * KVX_GIC_PER_CPU_IT_COUNT);
+
+ /* Disable all external lines on this core */
+ for (line = 0; line < KVX_GIC_INPUT_IT_COUNT; line++)
+ irq_line_set_enable(output_irq_line,
+ &gic->input_irq[line], 0x0);
+
+ irq_line_get_status_lac(output_irq_line, status);
+ }
+}
+
+static int kvx_gic_starting_cpu(unsigned int cpu)
+{
+ enable_percpu_irq(gic_parent_irq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int kvx_gic_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(gic_parent_irq);
+
+ return 0;
+}
+
+static int __init kvx_init_apic_gic(struct device_node *node,
+ struct device_node *parent)
+{
+ struct kvx_apic_gic *gic;
+ int ret;
+ unsigned int irq;
+
+ if (!parent) {
+ pr_err("kvx apic gic does not have parent\n");
+ return -EINVAL;
+ }
+
+ gic = kzalloc(sizeof(*gic), GFP_KERNEL);
+ if (!gic)
+ return -ENOMEM;
+
+ if (of_property_read_u32(node, "kalray,intc-nr-irqs",
+ &gic->input_nr_irqs))
+ gic->input_nr_irqs = KVX_GIC_INPUT_IT_COUNT;
+
+ if (WARN_ON(gic->input_nr_irqs > KVX_GIC_INPUT_IT_COUNT)) {
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ gic->base = of_io_request_and_map(node, 0, node->name);
+ if (!gic->base) {
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ raw_spin_lock_init(&gic->lock);
+ apic_gic_init(gic);
+
+ gic->domain = irq_domain_add_linear(node,
+ gic->input_nr_irqs,
+ &kvx_apic_gic_domain_ops,
+ gic);
+ if (!gic->domain) {
+ pr_err("Failed to add IRQ domain\n");
+ ret = -EINVAL;
+ goto err_iounmap;
+ }
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ pr_err("unable to parse irq\n");
+ ret = -EINVAL;
+ goto err_irq_domain_remove;
+ }
+
+ irq_set_chained_handler_and_data(irq, kvx_apic_gic_handle_irq,
+ gic);
+
+ gic_parent_irq = irq;
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+ "kvx/gic:online",
+ kvx_gic_starting_cpu,
+ kvx_gic_dying_cpu);
+ if (ret < 0) {
+ pr_err("Failed to setup hotplug state");
+ goto err_irq_unmap;
+ }
+
+ return 0;
+
+err_irq_unmap:
+ irq_dispose_mapping(irq);
+err_irq_domain_remove:
+ irq_domain_remove(gic->domain);
+err_iounmap:
+ iounmap(gic->base);
+err_kfree:
+ kfree(gic);
+
+ return ret;
+}
+
+IRQCHIP_DECLARE(kvx_apic_gic, "kalray,kvx-apic-gic", kvx_init_apic_gic);
--
2.37.2
