The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Fixes: 2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0c2f7be9f205..4427305f8a94 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -719,7 +719,7 @@ gcc: clock-controller@300000 {
#power-domain-cells = <1>;
reg = <0x00300000 0x90000>;
- clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&rpmcc RPM_SMD_LN_BB_CLK>,
<&sleep_clk>,
<&pciephy_0>,
@@ -1061,7 +1061,7 @@ dsi0_phy: phy@994400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@@ -1129,7 +1129,7 @@ dsi1_phy: phy@996400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@@ -2962,7 +2962,7 @@ kryocc: clock-controller@6400000 {
reg = <0x06400000 0x90000>;
clock-names = "xo", "sys_apcs_aux";
- clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+ clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
#clock-cells = <1>;
};
@@ -3081,7 +3081,7 @@ sdhc1: mmc@7464900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
- <&rpmcc RPM_SMD_BB_CLK1>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC1_BCR>;
pinctrl-names = "default", "sleep";
@@ -3105,7 +3105,7 @@ sdhc2: mmc@74a4900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmcc RPM_SMD_BB_CLK1>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC2_BCR>;
pinctrl-names = "default", "sleep";
@@ -3427,7 +3427,7 @@ adsp_pil: remoteproc@9300000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
- clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_mem>;
--
2.39.0
