Hi all,
This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2. Version 2 of this series incorporates
the feedback by Dan Carpenter and Sascha Hauer. Thanks for your comments!
Patches 1-4 clean up the code and make it more general.
Patch 5 activates the support for the RGB output block in the VOP2 driver.
Patch 6 adds pinctrls for the 16-bit and 18-bit RGB data lines.
Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.
Looking forward to your comments!
Best regards,
Michael
Michael Riesch (6):
drm/rockchip: vop2: initialize possible_crtcs properly
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x
.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 80 ++++++++++++----
drivers/gpu/drm/rockchip/rockchip_rgb.c | 19 ++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 172 insertions(+), 29 deletions(-)
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
--
2.30.2
