On Wed, Nov 30, 2022 at 04:15:19PM +0530, Bhupesh Sharma wrote: > Add the interconnect nodes inside SM6115 dtsi. > > Cc: Bjorn Andersson <andersson@xxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx> Seems the driver series is waiting for a v2. I'll drop this from my queue for now, please resubmit once the DT binding has landed. Thanks, Bjorn > --- > - Based on linux-next/master > - Depends on the SM6115 dt-binding and driver patchset, which can be > seen here: https://lore.kernel.org/linux-arm-msm/20221130103841.2266464-1-bhupesh.sharma@xxxxxxxxxx/ > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 51 ++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index e4a2440ce544..dad5ab3edf0e 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -485,6 +485,57 @@ usb_1_hsphy: phy@1613000 { > status = "disabled"; > }; > > + snoc: interconnect@1880000 { > + compatible = "qcom,sm6115-snoc"; > + reg = <0x01880000 0x60200>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, > + <&rpmcc RPM_SMD_SNOC_A_CLK>; > + > + clk_virt: interconnect-clk { > + compatible = "qcom,sm6115-clk-virt"; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_QUP_CLK>, > + <&rpmcc RPM_SMD_QUP_A_CLK>; > + }; > + > + mmnrt_virt: interconnect-mmnrt { > + compatible = "qcom,sm6115-mmnrt-virt"; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_MMNRT_CLK>, > + <&rpmcc RPM_SMD_MMNRT_A_CLK>; > + }; > + > + mmrt_virt: interconnect-mmrt { > + compatible = "qcom,sm6115-mmrt-virt"; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_MMRT_CLK>, > + <&rpmcc RPM_SMD_MMRT_A_CLK>; > + }; > + }; > + > + cnoc: interconnect@1900000 { > + compatible = "qcom,sm6115-cnoc"; > + reg = <0x01900000 0x8200>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, > + <&rpmcc RPM_SMD_CNOC_A_CLK>; > + }; > + > + bimc: interconnect@4480000 { > + compatible = "qcom,sm6115-bimc"; > + reg = <0x04480000 0x80000>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, > + <&rpmcc RPM_SMD_BIMC_A_CLK>; > + }; > + > qfprom@1b40000 { > compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; > reg = <0x01b40000 0x7000>; > -- > 2.38.1 >
