This series adds support for the trace performance monitoring and
diagnostics hardware (TPDM and TPDA). It is composed of two major
elements.
a) Changes for original coresight framework to support for TPDM and TPDA.
b) Add driver code for TPDM and TPDA.
Introduction of changes for original coresight framework
Support TPDM as new coresight source.
Since only STM and ETM are supported as coresight source originally.
TPDM is a newly added coresight source. We need to change
the original way of saving coresight path to support more types source
for coresight driver.
The following patch is to add support more coresight sources.
coresight: core: Use IDR for non-cpu bound sources' paths.
Introduction of TPDM and TPDA
TPDM - The trace performance monitoring and diagnostics monitor or TPDM in
short serves as data collection component for various dataset types
specified in the QPMDA(Qualcomm performance monitoring and diagnostics
architecture) spec. The primary use case of the TPDM is to collect data
from different data sources and send it to a TPDA for packetization,
timestamping and funneling.
Coresight: Add coresight TPDM source driver
dt-bindings: arm: Adds CoreSight TPDM hardware definitions
coresight-tpdm: Add DSB dataset support
coresight-tpdm: Add integration test support
TPDA - The trace performance monitoring and diagnostics aggregator or
TPDA in short serves as an arbitration and packetization engine for the
performance monitoring and diagnostics network as specified in the QPMDA
(Qualcomm performance monitoring and diagnostics architecture)
specification. The primary use case of the TPDA is to provide
packetization, funneling and timestamping of Monitor data as specified
in the QPMDA specification.
The following patch is to add driver for TPDA.
Coresight: Add TPDA link driver
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
The last patch of this series is a device tree modification, which add
the TPDM and TPDA configuration to device tree for validating.
ARM: dts: msm: Add tpdm mm/prng for sm8250
Once this series patches are applied properly, the tpdm and tpda nodes
should be observed at the coresight path /sys/bus/coresight/devices
e.g.
/sys/bus/coresight/devices # ls -l | grep tpd
tpda0 -> ../../../devices/platform/soc@0/6004000.tpda/tpda0
tpdm0 -> ../../../devices/platform/soc@0/6c08000.mm.tpdm/tpdm0
We can use the commands are similar to the below to validate TPDMs.
Enable coresight sink first.
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
The test data will be collected in the coresight sink which is enabled.
If rwp register of the sink is keeping updating when do
integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data
generated from TPDM to sink.
There must be a tpda between tpdm and the sink. When there are some
other trace event hw components in the same HW block with tpdm, tpdm
and these hw components will connect to the coresight funnel. When
there is only tpdm trace hw in the HW block, tpdm will connect to
tpda directly.
+---------------+ +-------------+
| tpdm@6c08000 | |tpdm@684C000 |
+-------|-------+ +------|------+
| |
+-------|-------+ |
| funnel@6c0b000| |
+-------|-------+ |
| |
+-------|-------+ |
|funnel@6c2d000 | |
+-------|-------+ |
| |
| +---------------+ |
+----- tpda@6004000 -----------+
+-------|-------+
|
+-------|-------+
|funnel@6005000 |
+---------------+
This patch series depends on patch series:
[v7,00/15] coresight: Add new API to allocate trace source ID values
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20230116124928.5440-1-mike.leach@xxxxxxxxxx/
TPDM_TPDA commit tree:
https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/tpdm-tpda-v17
Changes in V17:
1. Rebase changes on V7 coresight: Add new API to allocate trace source ID values
2. Add documentation for TPDA and TPDM under
Documentation/tracing/coresight/. (Suzuki K Poulose <suzuki.poulose@xxxxxxx>)
Changes in V16:
1. Update device tree changes to match up with device tree bindings.
3. Update the copyright year to 2023.
Changes in V15:
1. coresight-tpda: Add more comments in trace id function.
2. qcom,coresight-tpdm.yaml: Add more comments in description.
3. Push "arm64: dts: qcom: sm8250: Add coresight components" out this series.
Changes in V14:
rebase to "[v5,00/14] coresight: Add new API to allocate trace source ID values" and latest 6.x kernel
Changes in V13:
1. Fix the conflicts when apply patches to the latest base line.
Changes in V12:
1. Clear bits for atid before setting them and relese atid when tpda
remove. -- Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Changes in V11:
1. Change dev_info to dev_dbg in TPDM/TPDA drivers. -- Suzuki K Poulose <suzuki.poulose@xxxxxxx>
2. Merge sysfs API change of integration_test to integration_test driver
change. -- Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Changes in V10:
1. Fix the error of TPDM yaml file. -- Rob Herring <robh@xxxxxxxxxx>
Changes in V9:
1. Rename yaml file for TPDM/TPDA and fix the error for the yaml files.
-- Rob Herring <robh@xxxxxxxxxx>
Changes in V8:
1. Use spinlock to protect drvdata of TPDM/TPDA -- Suzuki K Poulose <suzuki.poulose@xxxxxxx>
2. Use CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS as source type for TPDM -- Suzuki K Poulose <suzuki.poulose@xxxxxxx>
3. Fix the warning for yaml file of TPDM/TPDA -- Rob Herring <robh@xxxxxxxxxx>
Changes in V7:
1. Update the commit title and move the changes to right place which
is sorted by address for dtsi changes. -- Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Changes in V6:
1. Update maintainers in tpdm/tpda yaml file. -- Mike Leach <mike.leach@xxxxxxxxxx>
2. Set the .remove function pointer in the amba_driver structure
of tpdm/tpda driver. Add tpda_remove function for tpda driver. -- Mike Leach <mike.leach@xxxxxxxxxx>
3. Define datasets of tpdm as unsigned long. -- Mike Leach <mike.leach@xxxxxxxxxx>
4. Move all coresight nodes to sm8250.dtsi.
-- Mike Leach <mike.leach@xxxxxxxxxx>;Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
5. Remove CORESIGHT_TPDM_INTEGRATION_TEST config. -- Mike Leach <mike.leach@xxxxxxxxxx>
Changes in V5:
1. Keep the ETM source paths per-CPU and use IDR for other sources'
paths. (Suzuki K Poulose <suzuki.poulose@xxxxxxx>)
Changes in V4:
1. Drop trace id for tpdm source as its trace atid is defined by the tpda.
Allocate tpda's atid dynamically. (Mike Leach)
Changes in V3:
1. Use bitmap to assign the trace id. (Mathieu Poirier)
Changes in V2:
1. Use IDR to store the path of sources. (Mathieu Poirier)
2. Only add integration_test/enable/disable for TPDM. No other configs.
(Mathieu Poirier)
3. Move coresight dtsi changes to sm8250.dtsi. (Suzuki K Poulose)
Mao Jinlong (9):
coresight: core: Use IDR for non-cpu bound sources' paths.
Coresight: Add coresight TPDM source driver
dt-bindings: arm: Add CoreSight TPDM hardware
coresight-tpdm: Add DSB dataset support
coresight-tpdm: Add integration test support
Coresight: Add TPDA link driver
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Documentation: trace: Add documentation for TPDM and TPDA
arm64: dts: qcom: sm8250: Add tpdm mm/prng
.../testing/sysfs-bus-coresight-devices-tpdm | 13 +
.../bindings/arm/qcom,coresight-tpda.yaml | 129 +++++++++
.../bindings/arm/qcom,coresight-tpdm.yaml | 93 +++++++
.../trace/coresight/coresight-tpda.rst | 52 ++++
.../trace/coresight/coresight-tpdm.rst | 43 +++
MAINTAINERS | 1 +
arch/arm64/boot/dts/qcom/sm8250.dtsi | 164 +++++++++++
drivers/hwtracing/coresight/Kconfig | 23 ++
drivers/hwtracing/coresight/Makefile | 2 +
drivers/hwtracing/coresight/coresight-core.c | 42 ++-
drivers/hwtracing/coresight/coresight-tpda.c | 211 ++++++++++++++
drivers/hwtracing/coresight/coresight-tpda.h | 35 +++
drivers/hwtracing/coresight/coresight-tpdm.c | 259 ++++++++++++++++++
drivers/hwtracing/coresight/coresight-tpdm.h | 62 +++++
include/linux/coresight.h | 1 +
15 files changed, 1118 insertions(+), 12 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
create mode 100644 Documentation/trace/coresight/coresight-tpda.rst
create mode 100644 Documentation/trace/coresight/coresight-tpdm.rst
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h
create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c
create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h
--
2.39.0
