On 17/01/2023 13:02, rfoss@xxxxxxxxxx wrote:
From: Robert Foss <robert.foss@xxxxxxxxxx>
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 26a608144886..7878f42e9378 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -221,10 +221,32 @@ &cdsp {
firmware-name = "qcom/sm8350/cdsp.mbn";
};
+&dispcc {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l6b_1p2>;
+ status = "okay";
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l5b_0p88>;
+ status = "okay";
+};
+
&gpi_dma1 {
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/modem.mbn";
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>