On 16/01/23 9:35 pm, Roger Quadros wrote:
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>> index 4f179b146cab..962a922cc94b 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>> +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>> @@ -366,6 +366,10 @@ &cpsw3g {
>>>> pinctrl-names = "default";
>>>> pinctrl-0 = <&main_rgmii1_pins_default
>>>> &main_rgmii2_pins_default>;
>>>> +
>>>> + cpts@3d000 {
>>>> + ti,pps = <2 1>;
>>>> + };
>>>> };
>>>>
>>>> &cpsw_port1 {
>>>> @@ -464,3 +468,19 @@ partition@3fc0000 {
>>>> };
>>>> };
>>>> };
>>>> +
>>>> +#define TS_OFFSET(pa, val) (0x4+(pa)*4) (0x10000 | val)
>>> Should this go in ./include/dt-bindings/pinctrl/k3.h ?
>>> That way every board DT file doesn't have to define it.
>>>
>>> The name should be made more platform specific.
>>> e.g. K3_TS_OFFSET if it is the same for all K3 platforms.
>>> If not then please add Platform name instead of K3.
>> The offsets are board specific. If it is acceptable, I will add board specific
>> macro for the TS_OFFSET definition in the ./include/dt-bindings/pinctrl/k3.h
>> file. Please let me know.
> If it is board specific then it should remain in the board file.
The values you pass to macro maybe board specific. But the macro
definition itself same for a given SoC right? Also, is its same across
K3 family ?
Please use SoC specific prefix like AM62X_TS_OFFSET() or K3_TS_OFFSET()
accordingly.
Regards
Vignesh
