[PATCH v2 1/4] arm64: dts: qcom: msm/apq8x16-*: Move status property last

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's agreed that the status property should always be the last.
Move it in all msm8916 dts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts      | 44 ++++++++++---------
 .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 12 ++---
 .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts |  9 ++--
 .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 16 +++----
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 12 ++---
 .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 12 ++---
 .../qcom/msm8916-samsung-a2015-common.dtsi    | 12 ++---
 .../boot/dts/qcom/msm8916-samsung-j5.dts      | 12 ++---
 .../dts/qcom/msm8916-samsung-serranove.dts    | 12 ++---
 .../dts/qcom/msm8916-wingtech-wt88047.dts     | 12 ++---
 10 files changed, 78 insertions(+), 75 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index c52d79a55d80..110d22f6968b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -171,18 +171,16 @@ led@6 {
 
 &blsp_i2c2 {
 	/* On Low speed expansion */
-	status = "okay";
 	label = "LS-I2C0";
+	status = "okay";
 };
 
 &blsp_i2c4 {
 	/* On High speed expansion */
-	status = "okay";
 	label = "HS-I2C2";
+	status = "okay";
 
 	adv_bridge: bridge@39 {
-		status = "okay";
-
 		compatible = "adi,adv7533";
 		reg = <0x39>;
 
@@ -204,6 +202,8 @@ adv_bridge: bridge@39 {
 		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
 		#sound-dai-cells = <1>;
 
+		status = "okay";
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -227,34 +227,35 @@ adv7533_out: endpoint {
 
 &blsp_i2c6 {
 	/* On Low speed expansion */
-	status = "okay";
 	label = "LS-I2C1";
+	status = "okay";
 };
 
 &blsp_spi3 {
 	/* On High speed expansion */
-	status = "okay";
 	label = "HS-SPI1";
+	status = "okay";
 };
 
 &blsp_spi5 {
 	/* On Low speed expansion */
-	status = "okay";
 	label = "LS-SPI0";
+	status = "okay";
 };
 
 &blsp1_uart1 {
-	status = "okay";
 	label = "LS-UART0";
+	status = "okay";
 };
 
 &blsp1_uart2 {
-	status = "okay";
 	label = "LS-UART1";
+	status = "okay";
 };
 
 &camss {
 	status = "okay";
+
 	ports {
 		port@0 {
 			reg = <0>;
@@ -315,43 +316,41 @@ &mdss {
 };
 
 &mpss {
-	status = "okay";
-
 	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
+
+	status = "okay";
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pronto {
-	status = "okay";
-
 	firmware-name = "qcom/apq8016/wcnss.mbn";
-};
 
-&sdhc_1 {
 	status = "okay";
+};
 
+&sdhc_1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
-};
 
-&sound {
 	status = "okay";
+};
 
+&sound {
 	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
 	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
 	pinctrl-names = "default", "sleep";
@@ -360,6 +359,8 @@ &sound {
 		"AMIC2", "MIC BIAS Internal2",
 		"AMIC3", "MIC BIAS External1";
 
+	status = "okay";
+
 	quaternary-dai-link {
 		link-name = "ADV7533";
 		cpu {
@@ -392,12 +393,13 @@ codec {
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
 
 	pinctrl-names = "default", "device";
 	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
 	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 701a5585d77e..20301eaa3b95 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -152,8 +152,8 @@ led@1 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_vib {
@@ -165,26 +165,26 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 3618704a5330..a0f868854d53 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -133,26 +133,27 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+
+	status = "okay";
 };
 
 &sdhc_2 {
-	status = "okay";
 	vmmc-supply = <&reg_sd_vmmc>;
 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 8c07eca900d3..2d266fd417f8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -219,8 +219,8 @@ &lpass {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_vib {
@@ -232,16 +232,14 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
@@ -260,11 +258,11 @@ &sdhc_2 {
 	 * SD card slot and forgot to re-route to gpio38.
 	 */
 	cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
-};
 
-&sound {
 	status = "okay";
+};
 
+&sound {
 	model = "msm8916";
 	audio-routing =
 		"AMIC1", "MIC BIAS External1",
@@ -275,6 +273,8 @@ &sound {
 	pinctrl-0 = <&cdc_pdm_lines_act>;
 	pinctrl-1 = <&cdc_pdm_lines_sus>;
 
+	status = "okay";
+
 	primary-dai-link {
 		link-name = "WCD";
 		cpu {
@@ -297,8 +297,8 @@ codec {
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d1e8cf2f50c0..f63f0fb797b4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -219,8 +219,8 @@ &blsp1_uart2 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_usbin {
@@ -236,27 +236,27 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
 
 	non-removable;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 3899e11b9843..4d627d06f87b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -91,8 +91,8 @@ &blsp1_uart2 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_vib {
@@ -104,26 +104,26 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index d600916a0e55..13c586079e50 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -248,8 +248,8 @@ &mdss {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pronto {
@@ -257,26 +257,26 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&muic>, <&muic>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 7ac49a021563..8eb68bb6607c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -53,8 +53,8 @@ &blsp1_uart2 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 /* FIXME: Replace with SM5703 MUIC when driver is available */
@@ -67,27 +67,27 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 
 	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index d4984b3af802..34bee5211413 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -264,8 +264,8 @@ &blsp1_uart2 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_vib {
@@ -281,16 +281,14 @@ iris {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
@@ -309,11 +307,13 @@ &sdhc_2 {
 	 * (without tuning), so maybe only tuning is broken?
 	 */
 	no-1-8-v;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&muic>, <&muic>;
+	status = "okay";
 };
 
 &usb_hs_phy {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index a87be1d95b14..24a5c3486beb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -145,8 +145,8 @@ &blsp1_uart2 {
 };
 
 &pm8916_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm8916_vib {
@@ -158,26 +158,26 @@ &pronto {
 };
 
 &sdhc_1 {
-	status = "okay";
-
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
 
-&sdhc_2 {
 	status = "okay";
+};
 
+&sdhc_2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
 
 	non-removable;
+
+	status = "okay";
 };
 
 &usb {
-	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
 };
 
 &usb_hs_phy {
-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux