Hi Sinthu On 16/01/23 12:44, Sinthu Raja wrote:
From: Sinthu Raja <sinthu.raja@xxxxxx> Hi All, This series of patches add support for AM68 Starter kit(SK). AM68 SK is a low cost, small form factor board designed for TI’s AM68 SoC. Refer below link to AM68 Technical Reference Manual for further details: http://www.ti.com/lit/pdf/spruj28 Design files can be referrred from https://www.ti.com/lit/zip/SPRR463 Changes in V5: ============= Address review comments: - Remove the unessential comment. - Remove alignment property from secure-ddr node, as no memory is allocated out of this region. Changes in V4: ============= Repost after rebasing to 6.2 rc1 Changes in V3: ============== Address all the review comments and the changes are captured in separate patches. - Remove the unused nodes that are disabled by default. - Update the gpio regulator node: gpio-regulator-tlv to "regulator-tlv". V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@xxxxxx/t/#mbe43b02221733bb6eb06b203359e90ec08406afc V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@xxxxxx/ V3: https://lore.kernel.org/lkml/20230110110052.14851-1-sinthu.raja@xxxxxx/ V4: https://lore.kernel.org/lkml/20230105151740.29436-1-sinthu.raja@xxxxxx/ Sinthu Raja (3): dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: ti: Add initial support for AM68 SK System on Module arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board .../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 29 ++ 4 files changed, 367 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
For the series: Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx> -- Thanking You Neha Malcom Francis
