Re: [PATCH v3 5/6] ARM: dts: renesas: Use new media bus type macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Mon, Jan 16, 2023 at 11:24:10AM +0100, Geert Uytterhoeven wrote:
> On Sat, Jan 14, 2023 at 4:26 PM Laurent Pinchart wrote:
> > Geert, could you please take this in your tree for v6.3 ? The two
> > patches that the DT changes depend on have been merged in v6.2.
> 
> Thank you, I had missed these.
> 
> > On Thu, Jun 16, 2022 at 01:14:09AM +0300, Laurent Pinchart wrote:
> > > Now that a header exists with macros for the media interface bus-type
> > > values, replace hardcoding numerical constants with the corresponding
> > > macros in the DT sources.
> > >
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> 
> > > ---
> > >  arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts       | 11 +++++++----
> > >  .../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi     |  4 +++-
> > >  .../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi     |  4 +++-
> > >  3 files changed, 13 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > index 4e58c54cde17..33ac4bd1e63b 100644
> > > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > @@ -7,6 +7,9 @@
> > >   */
> > >
> > >  /dts-v1/;
> > > +
> > > +#include <dt-bindings/media/video-interfaces.h>
> > > +
> > >  #include "r8a7742-iwg21d-q7.dts"
> > >
> > >  / {
> > > @@ -242,7 +245,7 @@ port {
> > >               vin0ep: endpoint {
> > >                       remote-endpoint = <&cam0ep>;
> > >                       bus-width = <8>;
> > > -                     bus-type = <6>;
> > > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >               };
> > >       };
> > >  };
> > > @@ -273,7 +276,7 @@ port {
> > >               vin1ep: endpoint {
> > >                       remote-endpoint = <&cam1ep>;
> > >                       bus-width = <8>;
> > > -                     bus-type = <6>;
> > > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >               };
> > >       };
> > >  };
> > > @@ -305,7 +308,7 @@ vin2ep: endpoint {
> > >                       remote-endpoint = <&cam2ep>;
> > >                       bus-width = <8>;
> > >                       data-shift = <8>;
> > > -                     bus-type = <6>;
> > > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >               };
> > >       };
> > >  };
> > > @@ -335,7 +338,7 @@ port {
> > >               vin3ep: endpoint {
> > >                       remote-endpoint = <&cam3ep>;
> > >                       bus-width = <8>;
> > > -                     bus-type = <6>;
> > > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >               };
> > >       };
> > >  };
> > > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > > index 40cef0b1d1e6..c73160df619d 100644
> > > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > > @@ -7,6 +7,8 @@
> > >   * Copyright (C) 2020 Renesas Electronics Corp.
> > >   */
> > >
> > > +#include <dt-bindings/media/video-interfaces.h>
> 
> This .dtsi file is only intended to be included by
> arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts, which already has
> the include.  Hence if you don't mind, I would like to drop this part
> while applying  and queuing in renesas-devel for v6.3.

Isn't it better to include headers as needed to avoid depending on
indirect includes ?

> > > +
> > >  #define CAM_ENABLED  1
> > >
> > >  &CAM_PARENT_I2C {
> > > @@ -26,7 +28,7 @@ port {
> > >                       CAM_EP: endpoint {
> > >                               bus-width = <8>;
> > >                               data-shift = <2>;
> > > -                             bus-type = <6>;
> > > +                             bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >                               pclk-sample = <1>;
> > >                               remote-endpoint = <&VIN_EP>;
> > >                       };
> > > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > > index f5e77f024251..a7f5cfec64b8 100644
> > > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > > @@ -7,6 +7,8 @@
> > >   * Copyright (C) 2020 Renesas Electronics Corp.
> > >   */
> > >
> > > +#include <dt-bindings/media/video-interfaces.h>
> 
> Likewise
> 
> > > +
> > >  #define CAM_ENABLED  1
> > >
> > >  &CAM_PARENT_I2C {
> > > @@ -21,7 +23,7 @@ ov7725@21 {
> > >               port {
> > >                       CAM_EP: endpoint {
> > >                               bus-width = <8>;
> > > -                             bus-type = <6>;
> > > +                             bus-type = <MEDIA_BUS_TYPE_BT656>;
> > >                               remote-endpoint = <&VIN_EP>;
> > >                       };
> > >               };

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux