The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer channels and one 32-bit timer channel. It supports the following functions - Counter - Timer - PWM This patch series aims to add core, counter and pwm driver for MTU3a. The core instantiates child devices using mfd api. The 8/16/32 bit registers are mixed in each channel. The HW specifications of the IP is described in patch#1. Current patch set is tested for PWM mode1 on MTU3 channel and 16 and 32 bit phase counting modes on MTU1 and MTU2 channels. There is a plan to add clock event driver later for Power management. Ref: https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221010145222.1047748-2-biju.das.jz@xxxxxxxxxxxxxx/ v10->v11: * Added Rb tag from William Breathitt Gray for the driver patch * Replaced count2 channel name from "combined"->"cascaded", as channels are cascaded * Simplified the locking by adding the helper functions rz_mtu3_lock_if_counter_is_valid, rz_mtu3_lock_if_count_is_enabled, and rz_mtu3_lock_if_ch0_is_enabled. * Added the MAINTAINERS entries for the driver. v9->v10: * Added logs from PWM and counter * Added Rb tag from William Breathitt Gray for sysfs counter doc * Added helper function for rz_mtu3_count_{action,function}_read * Added priv->lock in rz_mtu3_count_function_read and rz_mtu3_count_ direction_read. * Added ch->is_busy check for rz_mtu3_action_read() * Added rz_mtu3_is_ch0_enabled() for device specific sysfs variables. * Added ch->is_busy check for device specific sysfs variables. v8->v9: * Added prescale/duty_cycle variables to struct rz_mtu3_pwm_chip and cached this values in rz_mtu3_pwm_config and used this cached values in get_state(), if PWM is disabled. * Added return code for get_state(). * Added available blocks for external_input_phase_clock_select_available * Removed the "This attribute" from the external_input_phase_clock_select description, and capitalize the word "counter" from description. * Removed the "This attribute" from the cascade_counts_enable description, and capitalize "counts" and "counter" * Moved these device-level configuration blocks to top of the file. * Added count_is_enabled variable to struct rz_mtu3_cnt * Added check for ch->is_busy and count_is_enabled before every Counter callback to ensure we do not try to access a busy channel used by other subsystem(eg: pwm). * Removed id parameter from rz_mtu3_32bit_cnt_setting() * Made definition of rz_mtu3_get_ch() in single line. * Replaced break->return in rz_mtu3_32bit_cnt_setting(), rz_mtu3_count_function_read() and rz_mtu3_initialize_counter() and removed redundant return 0. * Simplified synapse signal check for rz_mtu3_action_read(). v7->v8: * Add locking for RMW on rz_mtu3_shared_reg_update_bit() * Replaced enum rz_mtu3_functions with channel busy flag * Added API for request and release a channel. * Replaced cascade_enable->cascade_counts_enable * Updated commit header and description * Added external_input_phase_clock_select_available entry for driver- specific enum attribute and created a new entry block for it. * Add a line stating cascade_counts_enable is a boolean attribute. * Added missing 'component_id' suffix. * Simplified rz_mtu3_initialize_counter by calling rz_mtu3_request_ channel() and release the acquired sibling channel in case of error. * Simplified rz_mtu3_terminate_counter by calling rz_mtu3_release_ channel(). * Removed unused ceiling and ch_id from rz_mtu3_count_write() * Replaced the error -EINVAL->-EBUSY for rz_mtu3_is_counter_invalid() * Avoided race between rz_mtu3_count_{read, write} with rz_mtu3_ cascade_counts_enable_set() by adding locks and moved the lock before rz_mtu3_is_counter_invalid() * Protected the rz_mtu3_count_ceiling_read() function with a lock to make sure the cascade operation mode doesn't not change and that the priv data structure accesses don't race when they are changed in the ceiling_write() callback. * Added lock in rz_mtu3_cascade_enable_set() to make sure the other callbacks don't try to read the LWA state while updating LWA. * Added lock in rz_mtu3_ext_input_phase_clock_select_set() to ensure the other callbacks don't try to read the PHCKSEL state while updating PHCKSEL. * Added lock to avoid race between rz_mtu3_count_function_write() and rz_mtu3_action_read() * Updated rz_mtu3_action_read to return 0, if Synapse is in COUNTER_SYNAPSE _ACTION_NONE state. * Replaced sysfs variable cascade_enable->cascade_counts_enable * Renamed rz_mtu3_cascade_enable_get->rz_mtu3_cascade_counts_enable_get * Renamed rz_mtu3_cascade_enable_set->rz_mtu3_cascade_counts_enable_set * Removed redundent ceiling assignment from rz_mtu3_count_ceiling_read() * Removed unused ceiling and ch_id from rz_mtu3_count_write(). * Simplified rz_mtu3_pwm_request by calling rz_mtu3_request_channel() * Simplified rz_mtu3_pwm_free by calling rz_mtu3_release_channel() v6->v7: * Added channel specific mutex to avoid races between child devices (for eg: pwm and counter). * Added rz_mtu3_shared_reg_update_bit() to update bits. * Replaced sysfs variable "long_word_access_ctrl_mode->cascade_enable" * Updated Kernel version in sysfs Documentation * Updated commit description for counter driver * Added Register descriptions * Opimized size of cache variable by using union * Used test_bit() in rz_mtu3_is_counter_invalid() * Replaced val->timer_mode in rz_mtu3_count_function_{read,write} * Added TODO comment phase3 and phase5 modes. * replaced if-else with ternary expression in rz_mtu3_count_direction_read() * Used switch statement in rz_mtu3_count_ceiling_read to consistent with write * Provided default case for all switch statements. * Add mutex lock for avoiding races with other devices and counter * Updated comments in rz_mtu3_action_read() * Replaced COUNTER_COMP_DEVICE_BOOL->COUNTER_COMP_DEVICE_BOOL for cascade_enable * Replaced RZ_MTU3_GET_HW_CH->rz_mtu3_get_hw_ch * Added rz_mtu3_get_ch() to get channels * used rz_mtu3_shared_reg_update_bit for cascade_enable and selecting phase input clock. * Added rz_mtu3_is_counter_invalid() check in rz_mtu3_count_ceiling_read() * Added channel specific mutex lock to avoid race between counter device and rz_mtu3_pwm_{request,free} * Added pm_runtime_resume_and_get in rz_mtu3_pwm_enable() * Added pm_runtime_put_sync in rz_mtu3_pwm_disable() * Updated rz_mtu3_pwm_config() * Updated rz_mtu3_pwm_apply() v5->v6: * Added Rb tag from Rob and Krzysztof for the binding patch. * Updated commit and KConfig description for the driver patches * Selected MFD_CORE to avoid build error if CONFIG_MFD_CORE not set. * Improved error handling in core driver's probe(). * Fixed RZ_MTU3_GET_HW_CH Macro for argument reuse 'id' - possible side-effects? * Replaced SET_RUNTIME_PM_OPS->DEFINE_RUNTIME_DEV_PM_OPS and removed __maybe_unused from suspend/resume() * Replaced dev_get_drvdata from rz_mtu3_pwm_pm_disable() * Sorted header files for all driver files. v4->v5: * Modelled as timer bindings. * Fixed the typo in bindings. * Moved core driver from MFD to timer * Child devices instatiated using mfd_add_devices() * Documented sysfs entries external_input_phase_clock_select and long_word_access_ctrl_mode. * Updated the Kconfig with SoC vendor name * Introduced rz_mtu3_is_counter_invalid() * replaced pointer to an array of struct rz_mtu3_channel with a simple pointer to struct rz_mtu3_channel. * Added long_word_access_ctrl_mode sysfs entry for 16-bit and 32-bit access * Added external_input_phase_clock_select sysfs entry for selecting input clocks. * used preprocessor defines represent SIGNAL_{A,B,C,D}_ID instead of signal ids. v3->v4: * Dropped counter and pwm compatibeles as they don't have any resources. * Made rz-mtu3 as pwm provider. * Updated the example and description. * A single driver that registers both the counter and the pwm functionalities that binds against "renesas,rz-mtu3". * Moved PM handling from child devices to here. * replaced include/linux/mfd/rz-mtu3.h->drivers/mfd/rz-mtu3.h * Removed "remove" callback from mfd driver * There is no resource associated with "rz-mtu3-counter" and "rz-mtu3-pwm" compatible and moved the code to mfd subsystem as it binds against "rz-mtu". * Removed struct platform_driver rz_mtu3_cnt_driver. * Removed struct platform_driver rz_mtu3_pwm_driver. * Updated commit description * Updated Kconfig description * Added macros RZ_MTU3_16_BIT_MTU{1,2}_CH for MTU1 and MTU2 channels * Added RZ_MTU3_GET_HW_CH macro for getting channel ID. * replaced priv->ch[id]->priv->ch[0] in rz_mtu3_count_read() * Cached counter max values * replaced cnt->tsr in rz_mtu3_count_direction_read() * Added comments for RZ_MTU3_TCR_CCLR_NONE * Replaced if with switch in rz_mtu3_initialize_counter() and rz_mtu3_count_ceiling_write() * Added locks in initialize, terminate and enable_read to prevent races. * Updated rz_mtu3_action_read to take care of MTU2 signals. * Added separate distinct array for each group of Synapse. * Moved pm handling to parent. v2->v3: * Dropped counter bindings and integrated with mfd as it has only one property. * Removed "#address-cells" and "#size-cells" as it do not have children with unit addresses. * Removed quotes from counter and pwm. * Provided full path for pwm bindings. * Updated the binding example. * removed unwanted header files * Added LUT for 32 bit registers as it needed for 32-bit cascade counting. * Exported 32 bit read/write functions. * Modelled as a counter device supporting 3 counters(2 16-bit and 32-bit) * Add kernel-doc comments to document struct rz_mtu3_cnt * Removed mmio variable from struct rz_mtu3_cnt * Removed cnt local variable from rz_mtu3_count_read() * Replaced -EINVAL->-ERANGE for out of range error conditions. * Removed explicit cast from write functions. * Removed local variable val from rz_mtu3_count_ceiling_read() * Added lock for RMW for counter/ceiling updates. * Added different synapses for counter0 and counter{1,2} * Used ARRAY for assigning num_counts. * Added PM runtime for managing clocks. * Add MODULE_IMPORT_NS(COUNTER) to import the COUNTER namespace. RFC->v2: * replaced devm_reset_control_get->devm_reset_control_get_exclusive * Dropped 'bindings' from the binding title * Updated the binding example * Added additionalProperties: false for counter bindings * Squashed all the binding patches * Modelled as a single counter device providing both 16-bit and 32-bit phase counting modes * Modelled as a single pwm device for supporting different pwm modes. * Moved counter and pwm bindings to respective subsystems. Logs: root@smarc-rzg2l:/# /mtu_test.sh #### Zero duty cycle ### #### decrement Period ### #### Increment Period ### #### decrement duty cycle ### #### Increment duty cycle ### ### Unbind the PWM driver#### ### Bind the PWM driver#### Positive counting cascade_counts_enable is 0 #### Ch0 count 0 2 8 13 18 23 28 33 38 44 50 3 9 14 19 24 29 35 39 45 #### Ch1 count #### Select Phase clock Phase clock MTCLKA-MTCLKB 0 5 10 15 20 4 10 14 20 3 9 14 19 3 8 14 18 3 7 13 #### Select Phase clock Phase clock MTCLKA-MTCLKB cascade_counts_enable is 1 #### Ch2 count 0 5 10 15 21 25 31 36 41 46 51 56 61 67 71 77 82 87 92 97 ### Unbind the counter driver#### ### Bind the counter driver#### ### Unbind the Core driver#### ### Bind the Core driver#### Read at address 0x11010538 (0xffffb1aaa538): 0x00000000 root@smarc-rzg2l:/# Biju Das (6): dt-bindings: timer: Document RZ/G2L MTU3a bindings clocksource/drivers: Add Renesas RZ/G2L MTU3a core driver Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select counter: Add Renesas RZ/G2L MTU3a counter driver MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver pwm: Add Renesas RZ/G2L MTU3a PWM driver Documentation/ABI/testing/sysfs-bus-counter | 32 + .../bindings/timer/renesas,rz-mtu3.yaml | 302 ++++++ MAINTAINERS | 8 + drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + drivers/clocksource/rz-mtu3.c | 459 +++++++++ drivers/counter/Kconfig | 11 + drivers/counter/Makefile | 1 + drivers/counter/rz-mtu3-cnt.c | 903 ++++++++++++++++++ drivers/pwm/Kconfig | 11 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-rz-mtu3.c | 486 ++++++++++ include/clocksource/rz-mtu3.h | 237 +++++ 13 files changed, 2463 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml create mode 100644 drivers/clocksource/rz-mtu3.c create mode 100644 drivers/counter/rz-mtu3-cnt.c create mode 100644 drivers/pwm/pwm-rz-mtu3.c create mode 100644 include/clocksource/rz-mtu3.h -- 2.25.1
