On 13.01.2023 15:36, devi priya wrote:
> Enable APSS clock driver for IPQ9574 based devices
Please be more descriptive of what you're doing and why
you're doing it.
clk: qcom: apss-ipq-pll: Add IPQ9574 support
Add IPQ9574-specific APSS PLL configuration values.
mailbox: qcom-apcs-ipc: Add IPQ9574 support
Add a compatible for IPQ9574's mailbox. The SoC, similarly
to other IPQs uses the APSS IPQ PLL driver for CPU scaling.
>
> Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> ---
> drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++
> drivers/mailbox/qcom-apcs-ipc-mailbox.c | 5 +++++
> 2 files changed, 18 insertions(+)
>
> diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> index a5aea27eb867..dd0c01bf5a98 100644
> --- a/drivers/clk/qcom/apss-ipq-pll.c
> +++ b/drivers/clk/qcom/apss-ipq-pll.c
> @@ -61,6 +61,18 @@ static const struct alpha_pll_config ipq8074_pll_config = {
> .test_ctl_hi_val = 0x4000,
> };
>
> +static const struct alpha_pll_config ipq9574_pll_config = {
> + .l = 0x3b,
> + .config_ctl_val = 0x200D4828,
Lowercase hex, please.
> + .config_ctl_hi_val = 0x6,
> + .early_output_mask = BIT(3),
> + .aux2_output_mask = BIT(2),
> + .aux_output_mask = BIT(1),
> + .main_output_mask = BIT(0),
> + .test_ctl_val = 0x0,
> + .test_ctl_hi_val = 0x4000,
> +};
> +
> static const struct regmap_config ipq_pll_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> @@ -102,6 +114,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> static const struct of_device_id apss_ipq_pll_match_table[] = {
> { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
> { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
> + { .compatible = "qcom,ipq9574-a73pll", .data = &ipq9574_pll_config },
> { }
> };
These are very small changes, so maybe they'll pass, but generally
it's preferred to split changes per-file if possible (and here it is
possible if you change the APSS PLL driver first and then bind it in
APCS mbox afterwards).
> MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> diff --git a/drivers/mailbox/qcom-apcs-ipc-mailbox.c b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> index 0e9f9cba8668..90e74f9d7cb3 100644
> --- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> +++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> @@ -33,6 +33,10 @@ static const struct qcom_apcs_ipc_data ipq6018_apcs_data = {
> .offset = 8, .clk_name = "qcom,apss-ipq6018-clk"
> };
>
> +static const struct qcom_apcs_ipc_data ipq9574_apcs_data = {
> + .offset = 8, .clk_name = "qcom,apss-ipq6018-clk"
> +};
Please reuse ipq6018_apcs_data, it's identical.
Konrad
> +
> static const struct qcom_apcs_ipc_data msm8916_apcs_data = {
> .offset = 8, .clk_name = "qcom-apcs-msm8916-clk"
> };
> @@ -143,6 +147,7 @@ static int qcom_apcs_ipc_remove(struct platform_device *pdev)
> static const struct of_device_id qcom_apcs_ipc_of_match[] = {
> { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data },
> { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq6018_apcs_data },
> + { .compatible = "qcom,ipq9574-apcs-apps-global", .data = &ipq9574_apcs_data },
> { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data },
> { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data },
> { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data },
