On Thu, Nov 17, 2022 at 01:28:37PM -0600, Bjorn Helgaas wrote:
> Hi Robert,
>
> If you post a v2 for any reason, capitalize the subject line to match
> previous history:
>
> PCI: qcom: Rename host-init error label
> PCI: qcom: Drop unused post_deinit callback
> PCI: qcom: Sort device-id table
> PCI: qcom: Clean up IP configurations
> ...
If he could do that while rebasing on top of my current pci/qcom branch
that would be ideal, I tried to cherry-pick patches 5,6,7 but 5 does not
apply.
Thanks,
Lorenzo
>
> On Wed, Nov 16, 2022 at 10:48:39PM +0100, Robert Marko wrote:
> > IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
> > Add compatible for Gen3 port which uses the same controller as IPQ6018.
> >
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> > drivers/pci/controller/dwc/pcie-qcom.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 77e5dc7b88ad..97e8510c53fb 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -1817,6 +1817,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> > { .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
> > { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
> > { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
> > + { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
> > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
> > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
> > { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 },
> > --
> > 2.38.1
> >
