Current multiplier (60) results in CPU getting the rate which is unlisted in the CPU frequency tables (60 * 19.2 = 1152 MHz). This results in warnings from the cpufreq during startup. Change PLL programming (l = 54) to init CPU clocks to start with the frequency of 54 * 19.2 = 1036.8 MHz which is supported by both power and performance clusters from all speed bins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- drivers/clk/qcom/clk-cpu-8996.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c index ed8cb558e1aa..d51965fda56d 100644 --- a/drivers/clk/qcom/clk-cpu-8996.c +++ b/drivers/clk/qcom/clk-cpu-8996.c @@ -102,7 +102,7 @@ static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = { /* PLLs */ static const struct alpha_pll_config hfpll_config = { - .l = 60, + .l = 54, .config_ctl_val = 0x200d4828, .config_ctl_hi_val = 0x006, .test_ctl_val = 0x1c000000, -- 2.39.0