Enable USB3 role switch on RZ/V2M EVK by linking USB3 peri node with hd3ss3220 controller node. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- v1->v2: * No change --- .../boot/dts/renesas/r9a09g011-v2mevk2.dts | 64 +++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index 2c051f901ec7..fdf623ca270b 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -22,6 +22,29 @@ chosen { stdout-path = "serial0:115200n8"; }; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + memory@58000000 { device_type = "memory"; /* @@ -59,6 +82,28 @@ &i2c0 { pinctrl-names = "default"; clock-frequency = <400000>; status = "okay"; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; }; &i2c2 { @@ -163,7 +208,26 @@ &usb3host { }; &usb3peri { + companion = <&usb3host>; status = "okay"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; }; &wdt0 { -- 2.25.1